Jump to content

TarrifMan

Members
  • Content Count

    15
  • Joined

  • Last visited

Everything posted by TarrifMan

  1. yeah, I redid all the network paths and everything was back. Not sure how it broke in the first place tho! thanks for the help
  2. I did a rebuild on the disk and now my dockers versions say "not available" but the dockers are running and the webiu is accessible. I've restarted docker service, restarted the system, and checked for updates. However, when I checked for updates, it just stalls and never finishes. edit: 1 hour later, the Shinobi and radarr containers changed to "not available"
  3. One of my drives were suddenly disabled. I don't remember what the warning/error was that unraid gave me and am not sure where to check. Appreciate it if someone could help me out. titan-diagnostics-20200309-1446.zip
  4. I finally rebooted the system to update to 6.8.2 and suddenly I lost internet to the internet. I downgraded back to 6.8.0 and I still have no internet. I can ping local devices but cannot ping google.com or 8.8.8.8. Server is connected to a unifi switch which is connected to a unifi USG. All my other devices have internet access (Wired and wireless). I've noticed a "default" route is missing. PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data. 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.019 ms 64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.039 ms 64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.041 ms 64 bytes from 192.168.1.2: icmp_seq=4 ttl=64 time=0.041 ms 64 bytes from 192.168.1.2: icmp_seq=5 ttl=64 time=0.032 ms 64 bytes from 192.168.1.2: icmp_seq=6 ttl=64 time=0.040 ms 64 bytes from 192.168.1.2: icmp_seq=7 ttl=64 time=0.039 ms 64 bytes from 192.168.1.2: icmp_seq=8 ttl=64 time=0.041 ms 64 bytes from 192.168.1.2: icmp_seq=9 ttl=64 time=0.039 ms 64 bytes from 192.168.1.2: icmp_seq=10 ttl=64 time=0.032 ms --- 192.168.1.2 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9189ms rtt min/avg/max/mdev = 0.019/0.036/0.041/0.006 ms root@Titan:~# ping google.com -c5 ping: google.com: Name or service not known root@Titan:~# ping 8.8.8.8 -c5 ping: connect: Network is unreachable Network Settings: http://prntscr.com/r7qg7g http://prntscr.com/r7qgnt What I tried so far: disable/re-enable bonding (this resulted in me losing access to the server and had to disconnect power to get it to reboot) disable/re-enable bridging changing DNS (this resulted in me losing access to the server and had to disconnect power to get it to reboot) rebooting the switch/ USG I will send logs via pm diagnostics-20200225-2354.zip
  5. This happened before I ever got the NVME WD Blue.
  6. Post updated. unraid only boots with GPU (RX580) if IOMMU is disabled in BIOS. Pic shows what happens when IOMMU= Auto or Enabled
  7. I pressed stop array 15 mins ago and it's still not done... " Array Stopping•Retry unmounting disk share(s)." Me deleting /dev/ files might have broke unassigned devices too.... "Fatal error: Uncaught UnexpectedValueException: RecursiveDirectoryIterator::__construct(/dev/disk/by-id/): failed to open dir: No such file or directory in /usr/local/emhttp/plugins/unassigned.devices/include/lib.php:122 Stack trace: #0 /usr/local/emhttp/plugins/unassigned.devices/include/lib.php(122): RecursiveDirectoryIterator->__construct('/dev/disk/by-id...', 4096) #1 /usr/local/emhttp/plugins/unassigned.devices/include/lib.php(1232): listDir('/dev/disk/by-id...') #2 /usr/local/emhttp/plugins/unassigned.devices/include/lib.php(1294): get_unasigned_disks() #3 /usr/local/emhttp/plugins/unassigned.devices/UnassignedDevices.php(269): get_all_disks_info() #4 {main} thrown in /usr/local/emhttp/plugins/unassigned.devices/include/lib.php on line 122" Should I just turn the power off?
  8. I was trying to delete some files via the console. Types in /d and tab, enter without reading it until after the action was performed which resulted in /dev/ files being deleted (folders within are still there because I didn't do "rm -r"). Where can I get those files? What should I do?
  9. Thanks, I'll use it as cache then.
  10. GPU: (AMD Radeon RX580) Since Ryzen 3700x has no integrated graphics, I had a GPU plugged in the first time I booted unraid. It started but just kept saying "amd-vi: completion-wait loop timed out." Eventually, I just shut it off, removed the GPU and it booted up fine. IOMMU is enabled in the BIOS and SVI is also enabled. I rebooted again, this time, I checked the BIOS to make sure the m.2 ssd is detected; it is but it's not showing in unraid. UPDATE: System boots and detected the GPU only if IOMMU is disabled. Parts: Crucial 32GB CT2K16G4DFD8266 ECC EVGA 650W Supernova GQ 80+ Gold DELL YT674 PRO/1000 VT PCI-E NIC 4-PORT GIGABIT SERVER ADAPTER EXPI9404VT (AMD Radeon RX580 8GB) WD Blue SN500 500GB NVMe Internal SSD - Gen3 PCIe, M.2 2280, 3D NAND - WDS500G1B0C Model: Custom M/B: ASRock B450M Steel Legend Version BIOS: American Megatrends Inc. Version P2.50 (7/25/2019) CPU: AMD Ryzen 7 3700X 8-Core @ 3600 MHz HVM: Enabled IOMMU: Enabled Cache: 512 KiB, 4096 KiB, 32768 KiB Memory: 32 GiB DDR4 (max. installable capacity 128 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mbps, full duplex, mtu 1500 eth1: interface down eth2: interface down eth3: interface down eth4: interface down Kernel: Linux 4.19.56-Unraid x86_64 OpenSSL: 1.1.1c