noacess

I tried installing this docker today and for some reason I can't login with guacadmin/guacadmin Any ideas why this might be? If I create a user in the user-mapping.xml file I can get in with that. Another issue I'm having is getting a RDP connection to work. SSH works fine, but RDP won't seem to connect to my windows servers (NLA is off). Any help would be greatly appreciated!

So, the plot thickens a bit. I tried a few of my other disks I'm able to read from at over 100 MB/s. I'm going to see if I can find a correlation to the raid controller they're on (I have 2 M1015 cards besides the onboard SATA). I might swap a slow drive and a fast drive's position in the array to see what happens.

That definitely helped some. I made all the settings changes except for the jumbo frames one and transfer speeds peaked at 55MB/s which is certainly an improvement.

Hi everyone, What can I expect for read speeds on a 7200RPM SATA drive? Right now when I copy a 6GB file from unraid to my desktop I'm averaging around 30 - 35 MB/s which feels a bit slow. I don't think its networking related considering I copy files from my desktop to unraid at over 400 MB/s via 10Gbit to a SSD cache. So far I've moved the drive in question from my M1015 controller to an on board SATA 3 connector with a different cable but the speeds are about the same. Any thoughts/opinions? I'm using the latest version of unraid with no plugins/dockers/vms. Thanks for the help!

Anyone able to build a new version they can post for the latest beta? Thanks

I recently upgrade my cache drive and wanted to reuse the old one in the array so I decided to preclear it. Below are the results. Should I be worried about it? == Disk /dev/sdf has been successfully precleared == with a starting sector of 64 ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdf /tmp/smart_finish_sdf ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Spin_Retry_Count = 100 100 97 near_thresh 1 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 1 1 0 near_thresh 229 Airflow_Temperature_Cel = 70 77 45 near_thresh 30 Temperature_Celsius = 30 23 0 ok 30 Hardware_ECC_Recovered = 54 38 0 ok 88475969 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 3 sectors had been re-allocated before the start of the preclear. 3 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. Thanks!

YGPM - In for 1 card with a large bracket.

Has anyone purchased anything from here? I checked out their reseller rating and the reviews were pretty awful: http://www.resellerratings.com/store/Server_Supply_Inc I may have to break down and go the ebay route. I was hoping to avoid it since most of the cards are in California or overseas (I'm on the east coat). Thanks for the feedback all.

Still looking for one.

I'm looking to buy an IBM M1015 for an ESXi build I'd like to do. Please PM with with a price with shipping to 03077. Thanks! -noacess Ebay Feedback and heatware under: noacess http://www.heatware.com/eval.php?id=35181

I moved all of the disk drives to the Rosewill Controller and am still experiencing the same issues (two back to back parity checks showing sync errors). I'm going to move all the drives to the on board Nforce2 Sata II controller tonight and repeat the process. If that doesn't fix the issue I'm kind of at a loss as none of the disks have given me any indications that they're bad. I could build a whole new system and see if that works but my hopes are fading fast.... -noacess

I think the first thing I'm going to try is moving all of the drives to the Rosewill controller. Right now I believe all 4 drives are connected to the onboard Nforce 2 SATA 2 connectors. If that doesn't change anything I'm going to put my unraid setup in a new box. I actually have a second system with the same motherboard (A8N-SLI Premium) and a Athlon 64 4600+ CPU. I'll run a memtest on the second system tonight to prep for that scenario. *fingers crossed* -noacess

Sigh....it just finished: Last checked on Tue Mar 20 19:34:52 2012 EDT, finding 114 errors. Any suggestions? Thanks for the responses so far. -noacess

UPDATE: 69% done with the third parity check, Sync errors corrected: 18 I'll report back again with its finished.

SMART Reports attached. Thanks sdd-disk1.txt sda-disk2.txt sde-disk3.txt sdb-parity.txt

Hi All, First, my apologies if I've posted this in the wrong section. I'm a new user to unraid. I recently bought a pro license after evaluating the product and liking the results. Unfortunately, I'm running into parity check errors after copying my data over. I basically did back to back parity checks while also selecting the "Correct any Parity-Check errors by writing the Parity disk with corrected parity. " check box. What I ended up with was this: Last checked on Mon Mar 19 03:13:38 2012 EDT, finding 144 errors. Last checked on Mon Mar 19 13:58:46 2012 EDT, finding 134 errors. My setup is below. I've already ran memtest for about a day and a half with no errors showing up so I don't think its a memory issue. I don't think its a power supply issue either since I think 565 watts should be more than enough for 4 drives. Any other thoughts? Setup: UnRaid 5.0B14 Motherboard: Asus A8N-SLI Premium Processor: Athlon X2 4200 2B of DDR400 (512mbx4) Rosewill RC-218 PCI Express SATA II Controller Card Enermax 565W PSU Seagate 1.5TB HDD x4 If there are any logs you'd like to see let me know and I will post them. I've attached the syslog as a start. Thanks for your help! -noacess syslog32012.txt