Hirates Posted December 30, 2020 Share Posted December 30, 2020 Good evening I recently bought a dvbt card for tv headend. Now this carat is not displayed correctly or not at all. Does anyone have an idea how to install the drivers or what I can do so that the card is displayed in the tv headend? Quote Link to comment
ich777 Posted December 30, 2020 Share Posted December 30, 2020 Are you sure that this is the right subthread? This is the German section? Have you installed the DVB plugin? 1 Quote Link to comment
Hirates Posted December 30, 2020 Author Share Posted December 30, 2020 Höhö, Da habe ich wohl was verwechselt, also das DVB Plugin habe ich noch nicht Installiert, ich mache es gleich und melde mich dann zurück. Quote Link to comment
Hirates Posted December 30, 2020 Author Share Posted December 30, 2020 50 minutes ago, ich777 said: Are you sure that this is the right subthread? This is the German section? Have you installed the DVB plugin? Which DVB Plugin do you mean Quote Link to comment
ich777 Posted December 30, 2020 Share Posted December 30, 2020 Du kannst hier ruhig auf deutsch schreiben. 5 minutes ago, Hirates said: Which DVB Plugin do you mean Du musst die 6.9.0 RC2 installieren, den server rebooten und danach das plugin installieren. Im Plugin Support unterforum gibts einen hilfethread. Such einfach nach DVB-Driver. 1 Quote Link to comment
Hirates Posted December 31, 2020 Author Share Posted December 31, 2020 OK, jetzt habe ich das Plugin installiert. was ist genau mit (The Plugin tries to detect the correct Kernel Modules and load them at system start, but for some DVB cards it is necessary that you add a line to your '/boot/config/go' file like 'modprobe MODULENAME' and save the file. Replace MODULENAME by the Kernel Module that is needed for your card to initalize correctly, after that reboot the server.) gemeint? Quote Link to comment
ich777 Posted December 31, 2020 Share Posted December 31, 2020 9 minutes ago, Hirates said: OK, jetzt habe ich das Plugin installiert. was ist genau mit (The Plugin tries to detect the correct Kernel Modules and load them at system start, but for some DVB cards it is necessary that you add a line to your '/boot/config/go' file like 'modprobe MODULENAME' and save the file. Replace MODULENAME by the Kernel Module that is needed for your card to initalize correctly, after that reboot the server.) gemeint? Wird deine Karte im Plugin angezeigt? Bitte vergiss nicht nach der installation des Plugins Unraid neuzustarten. Welche Karte hast du? EDIT: Das Plugin versucht das/die Kernel Module zu laden bei manchen Karten muss das aber manuell gemacht werden (ist bei ganz wenigen der Fall). Bitte lies dir auch durch wie du die Karte dann in TVheadend angezeigt bekommst. Quote Link to comment
Hirates Posted December 31, 2020 Author Share Posted December 31, 2020 Meine Karte (DVB-S/DVB-S2 HDTV PCI-Karte TECHNISAT SkyStar S2, bulk) wird nicht angezeigt, ich habe meinen Server nach der Installation neu gestartet. Quote Link to comment
sd007 Posted January 1, 2021 Share Posted January 1, 2021 (edited) 20 hours ago, Hirates said: Meine Karte (DVB-S/DVB-S2 HDTV PCI-Karte TECHNISAT SkyStar S2, bulk) wird nicht angezeigt, ich habe meinen Server nach der Installation neu gestartet. Hmm, ich würde das nicht im Unraid Server machen, da haste nur Probleme. Ich habe das so gelöst. Ich habe einen kleinen Debian Buster TVHeadend SAT2IP Server mit 3x Digital-Devices MaxS8 installiert. Der leitet alles weiter. In Unraid habe ich einen TVHeadend mit NVIDIA Transcoding Unterstützung installiert, der auf die 24 Tuner im SAT2IP Server zugreift. Damit funzt das richtig gut. Btw, die Technisat SkyStar S2 ist auch schon einwenig in die Jahre gekommen... Gibts da noch aktuelle Kernelmodule? Edited January 1, 2021 by sd007 Rechtschreibfehler Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.