bitwit Posted December 31, 2020 Share Posted December 31, 2020 (edited) Unraid boot fails. Begins to load then shuts off. Ran scandisk on boot drive. Can load Unraid if booted on another PC. Where do I look to see what is wrong? Memtest is OK on unraid server with boot issue. Version is Unraid 5.0.3 Attached is the screenshot of directly before the server powers off without error or beep. Edited January 1, 2021 by bitwit Additional Information Quote Link to comment
JorgeB Posted January 1, 2021 Share Posted January 1, 2021 If a different computer boots with the same flash it suggests a hardware problem. Quote Link to comment
bitwit Posted January 1, 2021 Author Share Posted January 1, 2021 I was able to get server running after several boot attempts. Once booted I was able to verify drives. Then attempted shutdown and restart, as soon as Linux attempted to load it shut down? Where can I look to find what is going wrong? There must be some sort of a log??? Quote Link to comment
Squid Posted January 1, 2021 Share Posted January 1, 2021 If it's actually shutting off, it suggests either the power supply is turning itself off due to excessive current demands being made on it, or the processor is overheating and shutting the system down (bad fan?) Quote Link to comment
bitwit Posted January 1, 2021 Author Share Posted January 1, 2021 I was able to get server running after several boot attempts. Once booted I was able to verify drives. Then attempted shutdown and restart, as soon as Linux attempted to load it shut down? Where can I look to find what is going wrong? There must be some sort of a log??? Quote Link to comment
bitwit Posted January 1, 2021 Author Share Posted January 1, 2021 The problem is with PC main board. Problem has been resolved. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.