zappie08 Posted January 30, 2021 Share Posted January 30, 2021 Hello, I have been searching through forums and troubleshooting this issue for days now with no success. Recently I decided that I need to add a graphics card to help with plex transcoding. I was going to follow spaceinvaders tutorial on how to do this but decided to test if the GPU worked in unraid before upgrading the os to beta. and to my surprise, unraid didn't recognize my gpu. I've tried all pcie ports, updating bios, made sure the pcie lanes are at x16, enabling IOMMU, ..and more with no luck. My last resort was to ask here! The gpu definitely works..I tested it with the same system booting off a windows boot drive. Open to any suggestions. baljeet-diagnostics-20210130-2219.zip Quote Link to comment
JorgeB Posted January 30, 2021 Share Posted January 30, 2021 No Nvidia GPU detected, this is a hardware issue, try a different slot if available or a different board. Quote Link to comment
zappie08 Posted February 1, 2021 Author Share Posted February 1, 2021 I have tested with a 1060 and a 1080 on all slots. Still nothing Quote Link to comment
saarg Posted February 1, 2021 Share Posted February 1, 2021 Does your PSU have enough power? Did you connect the power cables fully? As jorgeb said, this is a hardware issue. Quote Link to comment
zappie08 Posted February 1, 2021 Author Share Posted February 1, 2021 (edited) yes. its a 1000w psu. cables are connected properly. The configuration does work when i boot the system up with windows. This is why i thought it was an unraid config issue I'll try with my main build and see if it works there Edited February 2, 2021 by zappie08 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.