UtahDeLorean Posted February 6, 2021 Share Posted February 6, 2021 Just some back ground. I have 12 spinning drives and 2 NVME drives as cache drives.. I just purchased a disk Shelf with Twenty-four 1Tb drives. I understand that I can only have 30 drives under 6.8, but with 6.9 I can have cache pools and if I understand it I can have more then 30 drives at that point. That being said when I go to 6.9 and set up pools I can send one up for Movies, TV, Music, Pictures. When I do so can I just set each category to each one and it will automatically move from the current array to each of the pools? Currently I have 43tb and want to add 24tb from the disk array Quote Link to comment
JorgeB Posted February 6, 2021 Share Posted February 6, 2021 V6.8 allows 30 array devices and 24 cache devices, v6.9 allows multiple pools of up to 30 devices each, pools can only use one of the available btrfs profiles, but yes you can have separate pools with all of them moving data to the array when the mover runs. Quote Link to comment
UtahDeLorean Posted February 6, 2021 Author Share Posted February 6, 2021 Thanks for the reply... It looks like I have some more planning to do. When I first started on Unraid I never thought that I would be at the point that I am at now where I need to add more drives and expanding like I am I am guessing that I should upgrade to the 6.9 now vs later? Quote Link to comment
JorgeB Posted February 7, 2021 Share Posted February 7, 2021 You can upgrade at any time, upgrade now if you need multiple pools. Quote Link to comment
UtahDeLorean Posted February 9, 2021 Author Share Posted February 9, 2021 So I pulled the trigger and moved to 6.9. I put almost all of the drives into the main array. I however have 6 drives that I put into its own pool... It's only giving me 3Tb (it's Six 1Tb drives) and it's not indicating any parity. So did I do something wrong? Also how should it show up on the network? Quote Link to comment
tola5 Posted February 9, 2021 Share Posted February 9, 2021 19 minutes ago, UtahDeLorean said: So I pulled the trigger and moved to 6.9. I put almost all of the drives into the main array. I however have 6 drives that I put into its own pool... It's only giving me 3Tb (it's Six 1Tb drives) and it's not indicating any parity. So did I do something wrong? Also how should it show up on the network? Will think it for you chose raid1 when you make it ? And for the network par I like too know myself should just too make a question myself after use 2 X 4TB so that we can both need help too . My are also just setting there Quote Link to comment
JonathanM Posted February 9, 2021 Share Posted February 9, 2021 23 minutes ago, UtahDeLorean said: 6 drives that I put into its own pool... It's only giving me 3Tb (it's Six 1Tb drives) and it's not indicating any parity. That's correct, the default layout for pools containing multiple drives is BTRFS RAID1. What were you expecting? You can change BTRFS RAID levels if you wish. 25 minutes ago, UtahDeLorean said: Also how should it show up on the network? If you have disk shares enabled it would show up as \\servername\poolname. Otherwise it doesn't show over the network directly, but any user shares could be set to use it just like the regular cache pool in previous versions. Quote Link to comment
UtahDeLorean Posted February 9, 2021 Author Share Posted February 9, 2021 32 minutes ago, jonathanm said: That's correct, the default layout for pools containing multiple drives is BTRFS RAID1. What were you expecting? You can change BTRFS RAID levels if you wish. If you have disk shares enabled it would show up as \\servername\poolname. Otherwise it doesn't show over the network directly, but any user shares could be set to use it just like the regular cache pool in previous versions. I guess that I was expecting it to look just like the Array (Parity and then X amount of drives). So I will need to tinker with it more. I am also new to the Cache pool... Only recent;y have I switch from a SSD to a NVME drive and then added a 2nd NVME drive for redundancy. I was figuring of using the extra 6 drives as a back up drive, but now that I have fallen into the "I need more drives" I suspect that I will be purchasing another Disk Array from Ebay. Quote Link to comment
JorgeB Posted February 9, 2021 Share Posted February 9, 2021 6 hours ago, UtahDeLorean said: I guess that I was expecting it to look just like the Array (Parity and then X amount of drives). On 2/6/2021 at 8:19 AM, JorgeB said: pools can only use one of the available btrfs profiles Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.