tential Posted March 5, 2021 Share Posted March 5, 2021 Just noticed a drive is down, everything precleared fine. I did just set this server up in a 24 bay super micro chassis. I had some trouble slotting in some drives, but everything was up and working, but I wouldn't be surprised if I had to reseat it, but just wanted to check since I don't understand the errors to well. My diagnostics is attached, if I should stop my dockers or something let me know, I'm still adding a lot of data right now and had JUST started a transfer when I noticed this. tower-diagnostics-20210304-1732.zip Quote Link to comment
JorgeB Posted March 5, 2021 Share Posted March 5, 2021 Disk looks fine, looks more like a connection problem, try a different slot, but you'll need to rebuild it. 1 Quote Link to comment
tential Posted March 5, 2021 Author Share Posted March 5, 2021 That's what I thought, I had two execution errors and I've NEVER seen that. Now, my fans are going BALLISTIC even though all my temps are perfectly fine. How do I know which files if any are corrupt? The drive also now shows as an "unassigned" disk as well on the "Main" screen only, but also still as Disk 16 (Emulated). tower-diagnostics-20210305-0731.zip Quote Link to comment
JorgeB Posted March 5, 2021 Share Posted March 5, 2021 1 minute ago, tential said: How do I know which files if any are corrupt? Most likely all files are fine, but unless you have pre-existing checksums or are using btrfs no way to know for sure, you can however rebuild that disk to a spare one then compare the data with the old one. 1 1 Quote Link to comment
tential Posted March 5, 2021 Author Share Posted March 5, 2021 Ha, I wish I had a spare drive. I'm too lazy to wait, I'm running TDARR_AIO anyway so I should be able to find anything that broke. So do I just reseat the drive and "rebuild" the system then? Quote Link to comment
JorgeB Posted March 5, 2021 Share Posted March 5, 2021 https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive Make sure the emulated disk is mounting and contents look correct before rebuilding on top. 1 1 Quote Link to comment
tential Posted March 5, 2021 Author Share Posted March 5, 2021 (edited) 4 minutes ago, JorgeB said: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive Make sure the emulated disk is mounting and contents look correct before rebuilding on top. When I click the link I don't see that "Re enable the drive" section? Which number section do I look at? Edited March 5, 2021 by tential Quote Link to comment
JorgeB Posted March 5, 2021 Share Posted March 5, 2021 Oops, wiki changed, basically, stop array, unassign that disk, start array, stop array, re-assign the disk, start array to begin rebuilding. 1 1 Quote Link to comment
tential Posted March 5, 2021 Author Share Posted March 5, 2021 3 minutes ago, JorgeB said: Oops, wiki changed, basically, stop array, unassign that disk, start array, stop array, re-assign the disk, start array to begin rebuilding. Got it, thanks a lot for the help! Quote Link to comment
tential Posted March 24, 2021 Author Share Posted March 24, 2021 For anyone reading this, this is happening to me when my network activity is maxed out, and my whole network freezes. I currently believe setting a DL cap on transmission will solve it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.