tential

I was searching for torrents today, and midway using this, it stopped working for me. Any tips to fix it? Can't get to the Web UI, not seeing any errors in the logs. Edit: It's working again. Weird. Maybe server was too overloaded.

Worked perfectly. If only I had copied my AppData folder as well lol :(. Gotta reset my sonarr and radarrr, learned my lesson though. Thanks for the help, ya, my SSD just straight died. Never had that before. Guess I need to backup my main PC and my AppData folders.

Uh, I might be completely idiotic. I must have a cable loose, that Samsung drive should not have been used, I meant to use a 500 GB SSD.... that's a Hard drive... Facepalm..... well. There goes all that data lol. So, I have a 480 GB Sandisk SSD that's not showing up is the issue. I'm guessing that drive is just completely dead? the 500GB HDD wasn't showing up earlier, but I guess I fixed them at the same time the Sandisk died. I swapped all the cables for the Sandisk, and swapped the drive for the known working 900+ GB SSD from crucial. Well, that explains why the 500GB HDD was dropping out... I hadn't been able to get it to show up and had wanted to salvage that data. Guess that's a no go and I can remove and throw that one away as well. Dumb dumb mistake lol. Do you think it's possible I can transfer the data off the SSD pool to the main pool, and then transfer that data back to the new SSD pool after I replace the dead drive and have everything work? Assuming the cache pool stays active long enough. Or just recommended to start fresh as data could be corrupting during transfer or something? I tried to salvage the data, currently transferring. Man, what a stupid error. I see the tutorial on replacing a cache drive. I'll try that and if not, I guess I can just rebuild now that I backed all the files up successfully.

I'm not sure what happened. Normally, I get issues when I run out of HDD space (I know, I shouldn't, sometimes I start too many downloads at once, but I'm not sure how it happened this time.) It's a shame, the 500GB HDD also had finally showed up and I was hoping to get the data off of it. It was fine, I shouldn't';t have been lazy and gotten the data earlier. Main concern is docker though. I've tried deleting the image and restarting docker. Should I just upgrade unraid/restart? tower-diagnostics-20221207-1614.zip

I noticed, in a recent update, it seems transmission expects you to configure the /config file location for the transmission-home folder, and its files. But, when we originally setup on prior versions, this wasn't necessary. I moved my transmission-home folder to a setup/transmission-home, then, mapped /config to this location, and no more errors, my log is clean again.

Hey guys, I was recently getting an error where transmission would stop working. It would work for a few hours, then stop. When I checked the logs, it was saying "Too many unsuccessful login attempts." How I fixed this? When I checked the logs, it was looking for a /config location. Except, when you setup transmission, you aren't asked for this location. I manually set up the path, and now, it works fine again. I'm using Haugene, but I hope this still helps people

Was this ever addressed? I Have a FAN B header I'd like to control as well. Edit: Apparently I did use FAN A, I just didn't have the minimum fan speed set high enough to deal with the splitter. Once I set the min fan speed high enough, I could see the fan RPM. Without it high enough, I guess it just defaults to certain set speed. Still would be interested to know how to get Fan B if needed.

How exactly did you do this? I can't figure it out and I'm getting the exact same error. It won't create the folder for me. Edit: All I had to do was change from dev to latest. Not sure why that happened?

Is there any chance the actual port is bad and could fry a new drive? When I took the drive out to reseat it, I saw a huge piece of lint(Piece of my sweatpants) somehow was logged there. No idea how this happened. It's been my parity drive for a long while now, so I can't understand how that happened. Also had a mouse in my place and see evidence the mouse was around my server (Gross, very sad). Just wondering since my 500GB drive doesn't show up anymore as well, but I'm guessing that was also on its last legs and died too. It was quite old and I stored it in a huge box of junk that I've moved a lot of times, without care to the 500GB drive, since I didn't think it even worked, but it did. Too bad I didn't salvage the data.

It stayed stuck at 10% last time before showing complete. I disabled spindown and spun up the drive and still, same thing. Looks like I need to reseat the drive? Edit: It's saying errors occurred, check Smart report this time. I've attached it. tower-smart-20211114-1323.zip

Trying now Just further info, I have a 500GB HDD that is VERY old in my system, it used to show up and now doesn't. It could have just died (I've transported the HDD a lot in boxes of junk and it's jostled around quite a bit), but maybe something is wrong with my backplane? I finished the reboot and SMART report. It ran without needing a reseat. Here it is attached. Drive is still being emulated currently. tower-smart-20211114-0420.zip

Shouldn't I reseat the drive or not necessary?

I think it's disconnected somehow? Smartctl open device: /dev/sdt failed: No such device I ran a smart test and it gave me that. Do I need to reseat the drive or am I out of power to run this? 20 drives, 2 SSDs, dual Xeons, all on 900-1000W server PSU?

Just got some errors. Not sure how serious or how to read the log. Any ideas? This drive is relatively new, and was my parity drive previously before I just upgraded to 14TB parity drives over the last 3 months or so. Additionally, my server has 900-1000W redundant PSUs. Any idea what caused this? Any additional info I can provide? tower-diagnostics-20211112-1555.zip

I can't connect/access the web gui unless my location is set to switzerland? When it's netherlands, it just says it can't connect to web gui. When I open it with switzerland, my logs come through clean and say success and I can use normally. This is what my logs say once I switch my location to netherlands(just keeps repeating): Wed May 26 15:06:56 2021 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 26 15:06:56 2021 TCP/UDP: Preserving recently used remote address: [AF_INET]191.96.168.102:502 Wed May 26 15:06:56 2021 Attempting to establish TCP connection with [AF_INET]191.96.168.102:502 [nonblock] Wed May 26 15:06:57 2021 TCP connection established with [AF_INET]191.96.168.102:502 Wed May 26 15:06:57 2021 TCP_CLIENT link local: (not bound) Wed May 26 15:06:57 2021 TCP_CLIENT link remote: [AF_INET]191.96.168.102:502 Wed May 26 15:06:58 2021 VERIFY ERROR: depth=0, error=certificate is not yet valid: C=US, ST=CA, L=LosAngeles, O=Private Internet Access, OU=Private Internet Access, CN=amsterdam426, name=amsterdam426 Wed May 26 15:06:58 2021 OpenSSL: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed Wed May 26 15:06:58 2021 TLS_ERROR: BIO read tls_read_plaintext error Wed May 26 15:06:58 2021 TLS Error: TLS object -> incoming plaintext read error Wed May 26 15:06:58 2021 TLS Error: TLS handshake failed Wed May 26 15:06:58 2021 Fatal TLS error (check_tls_errors_co), restarting Wed May 26 15:06:58 2021 SIGUSR1[soft,tls-error] received, process restarting Solved: https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md Followed the steps in Q19/A19

Lol, I literally just realized I screwed that up when I tried to import some files, fixed this, and had everything back and running. Came as quite the surprise. Yes, I'm a noob lol. Wow, can't believe how good using this is. Thanks for the reply. If anyone else is coming in having an issue connecting because they haven't updated/touched Transmission in a long time, you can just remove and reset the docker with the original paths. Pretty obvious if you're a pro, but if you're a noob like me, you may need it spelled out to you like I did.

I'm really trying to understand what I need to do but I feel like I'm too stupid to get this. I'm getting the connection refused error but I just don't understand exactly how you guys are fixing this. Do I just downgrade or do I add settings? This is quite confusing, sorry, I know servers aren't easy, but this is throwing my head for a loop. I have a similar issue to gacpac where my IPaddresses don't show up under transmission. I reinstalled transmission, but lost all my progress sadly. Darn, I thought if I didn't delete image I'd get all my stuff back. I have a list of torrents but it doesn't look like it's the same as my incomplete list.

I really thought OP was being conservative with those storage ranges until I saw the results. I'm at 74TB, but I've got 5 drives (Another 37TB probably. 4 8TB and 1 5TB. I highly doubt I ever use the 5 TB other than to replace a dead drive)) waiting but no more space. I've got a 24 bay server now for a second unraid server so I can continue adding more drives. 12 TB drives are now hitting $180 on sale, so really thought there would be very few in the 2-20 range. The amount of storage you can fit per drive is getting serious. You can get just the chassis on ebay for relatively cheap. Actually, the chassis and some parts(pretty sure it was fully working). I would have bought one, but I think I wanted the ease of the 24bay configuration and it was an extra $200 for 6 more bays. I figured worst case, I'll just get it and move my current unraid server that has 15 drives into that giving me 54 bays total, and if that's not enough then I don't know what's wrong with me. Unless you're a business and can't buy used/build, going to a shop like that directly is like going to a boutique gaming pc website. Of course you're paying a HUGE markup for a "boutique" build and can easily go out and buy the parts and put it together for far less.

I built something similar. Like if a 9 year old had tried to build what you built, that's what mine looks like. I used MDF. Is that safe to use? How do you know how much weight it holds? Maybe I'll have a larger friend sit in mine. I was going to put 2 servers in mine, but now I'm afraid it could break. I also wanted to add bracing in like you have built into your rack design but also braces the sides. How do you add brackets inside and have them sit flush with sides? I never could get it right and sanding it down to fit takes forever and then I feel like I'm either pushing the side walls out, or will be too small. My caster holes were not drilled into a 2 by 4 bracket inside like yours are. In how bad shape am I?

It's been over a year, so probably need to figure out a solution on your own like something to autorestart or limit the ram usage of the docker. I plan on upgrading to 32 gigs of ram eventually, but in the meantime I restart every 1-2 days or anytime I'm at my PC. Still makes my life way better with radarr than without, so can't complain.

I believe I'm not the only one, I know another user mentioned this docker, but it seems odd that only us 2 have mentioned it. Will have to wait til OP gets a chance to look. Maybe we should post on docker/github? Which is more appropriate? Never done that, not sure how it works.

When I use this docker I get runaway memory usage. Is this what you all are seeing? Want to report this issue, but want to make sure it's not just me.