NathanD223 Posted March 30, 2021 Share Posted March 30, 2021 Im on Unraid version: 6.9.1 (2021-03-08) Bit of an odd one So i changed cases for my Unraid build today so its all the same hardware but suddenly now if i toggle "auto start" in the disk settings then unraid boots but i cant access the webgui for around 20-45 minutes. I know its online because i can access plex locally and pi-hole is working. I know its 100% this causing the issue because Test 1: i unplugged my drives booted and the webgui loaded instantly and then i selected new config and put the drives back in and started the array to see if it started and even rebooted and upon reboot the webgui loads instantly Test 2: when i had booted from the previous test i enabled "auto start" after i had already booted and then rebooted once again and once again the webgui didnt work (waited around 10 minutes) and i then powered off the machine, unplugged my drives it booted and loaded the WebGui instantly and i did new config and reassigned the drives and rebooted and since new config disables auto start it loaded instantly So as listed above new config has auto-start disabled by default so thats why it works when the array cant start or a disk is missing to fully start them all i repeated this 2 more times and same results. Strange how it was working before and now that i rebuilt it in a different case its not working the same? i did quickly insert the usb into windows to copy all the files as a backup incase the USB ever dies but not sure if that would have caused it? Any and all help is much appreciated thank you Also i had auto-start enabled prior to moving the hardware into a new case and had no issues Quote Link to comment
trurl Posted March 30, 2021 Share Posted March 30, 2021 Repeat the test that causes the problem. Before rebooting and with the array started Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Quote Link to comment
NathanD223 Posted March 30, 2021 Author Share Posted March 30, 2021 I actually did this after i ran the tests before incase someone asked haha. Here hope it helps unraid-diagnostics-20210330-0058.zip Quote Link to comment
trurl Posted March 30, 2021 Share Posted March 30, 2021 Those diagnostics show autostart set to no. I thought you said the problem only occurred when autostart was yes. Quote Link to comment
NathanD223 Posted March 30, 2021 Author Share Posted March 30, 2021 ah i see. you want me to put autostart to yes and wait to 20-40 mins for the webgui to load? Quote Link to comment
itimpi Posted March 30, 2021 Share Posted March 30, 2021 7 minutes ago, NathanD223 said: ah i see. you want me to put autostart to yes and wait to 20-40 mins for the webgui to load? I would think yes so that the diagnostics show what is happening when you are encountering the problem. Quote Link to comment
NathanD223 Posted March 30, 2021 Author Share Posted March 30, 2021 Well i just did it and it took alot less time than before (8 minutes) but still worth a check over i think so here. last time it would take around a minute to load unraid-diagnostics-20210330-1553.zip Quote Link to comment
itimpi Posted March 30, 2021 Share Posted March 30, 2021 There appears to be a roughly 5 minute gap in the log which finishes with ar 30 15:52:42 Unraid unassigned.devices: Cannot 'Auto Mount' Remote Shares. Network not available! It might be worth disabling that auto mount to see if that is the problem? If it is then at least we know in what area the problem lies. Quote Link to comment
NathanD223 Posted March 30, 2021 Author Share Posted March 30, 2021 Ok so webgui still unavailable with automount turned off Quote Link to comment
NathanD223 Posted March 30, 2021 Author Share Posted March 30, 2021 and again 8 minutes later i can connect haha Quote Link to comment
itimpi Posted March 30, 2021 Share Posted March 30, 2021 3 hours ago, NathanD223 said: and again 8 minutes later i can connect haha Probably worth posting new diagnostics to see if there is the same 5 minute gap? Interesting that the original UD message I posted mentioned the network not being available - any idea what might be behind that? Quote Link to comment
NathanD223 Posted March 30, 2021 Author Share Posted March 30, 2021 No idea but Pi-Hole DNS is on my Unraid server but its never presented a problem in the 4 months ive been using unraid so not sure thats what is causing it Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.