CorserMoon Posted April 8, 2021 Share Posted April 8, 2021 (edited) So this is a strange one. I upgraded my server from 6.8.3 to 6.9.1 yesterday without issue. Except since them, my NVME cache drive have been running significantly hotter than usual. I had the warning set at 45C (which is fairly low for a samsung 970) but essentially never got any temp warnings regardless. After the upgrade though, I've been getting a lot of warnings and its frequently sitting above 50C for extended periods. While this is still well within safe operating temps, I'm curious if others have seen this with 6.9.1? I even upped my fan speeds from 30% to 50% and still staying hot. Utilization is at 25%. Thoughts? Edited April 8, 2021 by CorserMoon Quote Link to comment
ChatNoir Posted April 8, 2021 Share Posted April 8, 2021 This looks OK for an NVME drive. But I think the user set limits for specific drives were reset in the update. Maybe you had made adjustments before and need to do them again in 6.9 ? Quote Link to comment
CorserMoon Posted April 8, 2021 Author Share Posted April 8, 2021 3 hours ago, ChatNoir said: This looks OK for an NVME drive. But I think the user set limits for specific drives were reset in the update. Maybe you had made adjustments before and need to do them again in 6.9 ? Hmmmm, could be I suppose. Thanks for the thought! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.