RadTechDad Posted April 16, 2021 Share Posted April 16, 2021 I saw that there was an update for Unraid, so I ran it. Because I'm tired I just went into "zone out" mode and I'm not sure what happened. I thought it finished, which is why I think I closed the popup dialog, but again, not sure. After I closed the dialog, Unraid was still saying there was an update and some of the page wasn't rendering correctly. So I stupidly rebooting thinking (again, because I'm tired), oh, this must be like Windows and need to reboot after updating. Well, now it won't start up. I cannot access it via SSH and cannot access it via WebGUi. Did I just screw up my whole server? Since many of the settings are stored on the USB, is there a way that I can just reinstall the newest version and import all my old settings without the loss of data? Quote Link to comment
ChatNoir Posted April 16, 2021 Share Posted April 16, 2021 @HoLyCoW, you should only have to DL the zip file from here : https://unraid.net/download then replace the bz files of your flash drive from those of the zip file. Quote Link to comment
RadTechDad Posted April 16, 2021 Author Share Posted April 16, 2021 @ChatNoir OMG. Thank you so much! However, I'm running into a HUGE issue. With 6.9.2, some of my drives aren't being recognized: So I downgraded back to 6.8.3 and my drives are recognized again: Is this a known issue with 6.9.2? What can I do to resolve this? Quote Link to comment
SimonF Posted April 16, 2021 Share Posted April 16, 2021 Which controller do you have Quote Link to comment
itimpi Posted April 16, 2021 Share Posted April 16, 2021 19 minutes ago, HoLyCoW said: Is this a known issue with 6.9.2? What can I do to resolve this? You are likely to get better informed feedback if you attach your systems diagnostics zip file (obtained via Tools->Diagnostics) to your NEXT post so we can see more about your configuration Quote Link to comment
RadTechDad Posted April 16, 2021 Author Share Posted April 16, 2021 1 hour ago, SimonF said: Which controller do you have Here's a list of my devices.... looks like I have a few. Not sure which ones are relavent: IOMMU group 0: [8086:1918] 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07) IOMMU group 1: [8086:1901] 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07) IOMMU group 2: [8086:191d] 00:02.0 VGA compatible controller: Intel Corporation HD Graphics P530 (rev 06) IOMMU group 3: [8086:a12f] 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) [8086:a131] 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31) IOMMU group 4: [8086:a13a] 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31) [8086:a13d] 00:16.3 Serial controller: Intel Corporation 100 Series/C230 Series Chipset Family KT Redirection (rev 31) IOMMU group 5: [8086:a102] 00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31) IOMMU group 6: [8086:a110] 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1) IOMMU group 7: [8086:a114] 00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1) IOMMU group 8: [8086:a149] 00:1f.0 ISA bridge: Intel Corporation C236 Chipset LPC/eSPI Controller (rev 31) [8086:a121] 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31) [8086:a170] 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31) [8086:a123] 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31) IOMMU group 9: [8086:15b7] 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-LM (rev 31) IOMMU group 10: [104c:8240] 02:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge IOMMU group 11: [1000:0097] 04:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) 1 hour ago, itimpi said: You are likely to get better informed feedback if you attach your systems diagnostics zip file (obtained via Tools->Diagnostics) to your NEXT post so we can see more about your configuration I've included it now. sal-9000-diagnostics-20210416-1046.zip Quote Link to comment
SimonF Posted April 16, 2021 Share Posted April 16, 2021 Looks like the LSI 3008 is where the missing disks are connected. But unable to say why it had a problem under 6.9 with current diags as they are from 6.8.3 Quote Link to comment
JorgeB Posted April 16, 2021 Share Posted April 16, 2021 The missing disks are connected to an LSI 9300-8i or similar, it should work fine with v6.9.x, I have some myself, to see the issue you'd need to upgrade again and post new diags from v6.9. Quote Link to comment
RadTechDad Posted April 16, 2021 Author Share Posted April 16, 2021 Okay, so I upgraded again through the WebUI so as to provide new diagnostic configs. I updated, rebooted, and now everything is working okay. I'm not sure what happened the first time around, but thank you all for your help. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.