MWar Posted June 8, 2021 Share Posted June 8, 2021 I have an unraid with a 4TB parity drive and a 4TB data drive. The data drive failed. The parity drive could not rebuild the data drive. Doing a bit by bit image, showed that so sectors were struggling to read. I was able to read all the struggling sectors. When I use the Image drive in unraid. The serial number doesnt match, so throws errors when you try to do anything. Is there a way to change what the unraid is expecting as the model/serial number of the parity drive. This is not a .img file of the drive. It is an exact copy of the drive with the difficult sectors read correctly using a DDI machine. Thanks Quote Link to comment
JonathanM Posted June 8, 2021 Share Posted June 8, 2021 Are there any other data drives? Or 2 drives, 1 data 1 parity only? Quote Link to comment
MWar Posted June 9, 2021 Author Share Posted June 9, 2021 No other drives just those 2 Quote Link to comment
JorgeB Posted June 9, 2021 Share Posted June 9, 2021 22 hours ago, MWar said: The parity drive could not rebuild the data drive. Why not? It should... 22 hours ago, MWar said: When I use the Image drive in unraid. The serial number doesnt match, so throws errors when you try to do anything. Is there a way to change what the unraid is expecting as the model/serial number of the parity drive. You can do a new config, then check "parity is already valid" before array start and run a parity check. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.