magicman32 Posted November 28, 2021 Share Posted November 28, 2021 (edited) Hi All What got me to this point my motherboard m.2 ssd slots died, wasnt detecting ssd (sent back to manufacturer and confirmed dead) so I ended up buying a new motherboard, installed, posted would get an hour or two installing some docker containers, first was plex I was able to add libraries ok, but after a while plex was freezing up while downloading metadata then unraid would become unresponsive, Id click on reboot server, nothing happend, so I had to hard reboot then happened a few times...I would delete my docker image and reformat my cache drives and same result plex would freeze up and then unraid would become unstable When my m/b died I was thinking maybe corrupted ssds So I took them out and added a 2.5in ssd I had laying around as new cache drive reinstalled appdata backup get plex up and running (fresh docker image) from time to time it becomes unresponsive and says it cant find my plex server (almost like network drops out) Could my array hdds be corrupted? I am currently running memtest86 via flash boot and have 21 errors 90% complete could this cause system instability? Im not sure what to check at this stage Included are my diagnotic file, any help would be great........ I am currently running 6.9.2 asrock x399 threadripper m/b 2950x threadripper cpu thebeast-diagnostics-20211128-1935.zip Edited November 28, 2021 by magicman32 Quote Link to comment
magicman32 Posted November 30, 2021 Author Share Posted November 30, 2021 anyone? Quote Link to comment
JorgeB Posted November 30, 2021 Share Posted November 30, 2021 Start here: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173 Quote Link to comment
magicman32 Posted November 30, 2021 Author Share Posted November 30, 2021 Its been running like clockwork for 18 months now with 2nd gen threadripper at 3200mhtz Quote Link to comment
JonathanM Posted November 30, 2021 Share Posted November 30, 2021 1 hour ago, magicman32 said: Its been running like clockwork for 18 months now with 2nd gen threadripper at 3200mhtz That was then. Is it stable now? Quote Link to comment
magicman32 Posted December 1, 2021 Author Share Posted December 1, 2021 no, memory was bad, in process of being replaced Quote Link to comment
magicman32 Posted December 2, 2021 Author Share Posted December 2, 2021 But thinking I may go 2666mhtz when I order replacements Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.