magicman32

Members
  • Posts

    37
  • Joined

  • Last visited

Everything posted by magicman32

  1. Hi All, Been thru a few changes of late.....motherboard died, then ram went bad, replaced both then once server was back online, was getting my dashboard with error message "500 Internal Server Error nginx" but can still see my running containers in other tabs so after some searching someone suggested it might be flashdrive needs replacing so I did that and then deleted my docker image (in case it to was corrupted) and started from scratch I am still getting my dashboard error out on me from time to time, no sure what to check for if someone could checkout my diagnostic files that would be a great help also in last few lines of boot process I am getting errors about not finding libvert file in screenshot any help or suggestions on what to look for will be greatful, only been into unraid last 12 months thebeast-diagnostics-20211223-1746.zip
  2. But thinking I may go 2666mhtz when I order replacements
  3. Its been running like clockwork for 18 months now with 2nd gen threadripper at 3200mhtz
  4. Hi All What got me to this point my motherboard m.2 ssd slots died, wasnt detecting ssd (sent back to manufacturer and confirmed dead) so I ended up buying a new motherboard, installed, posted would get an hour or two installing some docker containers, first was plex I was able to add libraries ok, but after a while plex was freezing up while downloading metadata then unraid would become unresponsive, Id click on reboot server, nothing happend, so I had to hard reboot then happened a few times...I would delete my docker image and reformat my cache drives and same result plex would freeze up and then unraid would become unstable When my m/b died I was thinking maybe corrupted ssds So I took them out and added a 2.5in ssd I had laying around as new cache drive reinstalled appdata backup get plex up and running (fresh docker image) from time to time it becomes unresponsive and says it cant find my plex server (almost like network drops out) Could my array hdds be corrupted? I am currently running memtest86 via flash boot and have 21 errors 90% complete could this cause system instability? Im not sure what to check at this stage Included are my diagnotic file, any help would be great........ I am currently running 6.9.2 asrock x399 threadripper m/b 2950x threadripper cpu thebeast-diagnostics-20211128-1935.zip
  5. What I am trying to do is have 2 gpus for passthru to 2 seperate vms Problem: Installed 2nd gpu in unraid server (identical amd rx570 8gb cards) when I start a single vm....my vms tab disappears and go to settings vm manger and thats gone too Setup: I have a linux vm and a windows 11 vm installed when it comes to vm setup each vm has its own gpu with seperate id (so I know which card is which), each card has its own iommu group Outcome: My server becomes so unstable to the point I have to reboot, because it freezes so I cant get any logs to see whats wrong........ at first I thought it was a power issue, I started with a 750w psu running 2950x threadripper 6 hdds and 2 amd rx570 8g gpus So I upgraded the psu to a 1000w psu and getting same issues, So I have taken out 2nd gpu and system is now stable once more...... Im not sure if its a setup thing or that I have identical gpus If someone has some insight to dual gpu setup that would be great, Im not sure what to check for in logs.........any help would be greatful, a bit lost and disappointed I cant get this working I have same results with 6.9.2 and now with 6.10 rc1
  6. Hi All What I am trying to do is have 2 gpus for passthru to 2 seperate vms Problem: Installed 2nd gpu in unraid server (identical amd rx570 8gb cards) when I start a single vm....my vms tab disappears and go to settings vm manger and thats gone too Setup: I have a linux vm and a windows 11 vm installed when it comes to vm setup each vm has its own gpu with seperate id (so I know which card is which), each card has its own iommu group Outcome: My server becomes so unstable to the point I have to reboot, because it freezes so I cant get any logs to see whats wrong........ at first I thought it was a power issue, I started with a 750w psu running 2950x threadripper 6 hdds and 2 amd rx570 8g gpus So I upgraded the psu to a 1000w psu and getting same issues, So I have taken out 2nd gpu and system is now stable once more...... Im not sure if its a setup thing or that I have identical gpus If someone has some insight to dual gpu setup that would be great, Im not sure what to check for in logs.........any help would be greatful, a bit lost and disappointed I cant get this working I have same results with 6.9.2 and now with 6.10 rc1
  7. I have just noticed my docker panels not displaying giving me this error........ Panel plugin not found: dalvany-image-panel Im not sure where to look to fix this, any suggestions would be greatful
  8. I am having issues with browser I cant select docker icons to open image in new tab, tried 4 diff browsers, like they are part of background
  9. Hi All, I can get a win10 vm working with straight kvm, but when I try to passthrough gpu I cant login via splashtop desktop can someone please look at my xml code and see if I am leaving something out.....Its doing my head in, I had it working, then I changed something, but cant recall what I changed....... <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='14'> <name>Windows 10</name> <uuid>9d745357-1847-20a4-5775-7e8b3930e6ae</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>16777216</memory> <currentMemory unit='KiB'>16777216</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>12</vcpu> <cputune> <vcpupin vcpu='0' cpuset='10'/> <vcpupin vcpu='1' cpuset='26'/> <vcpupin vcpu='2' cpuset='11'/> <vcpupin vcpu='3' cpuset='27'/> <vcpupin vcpu='4' cpuset='12'/> <vcpupin vcpu='5' cpuset='28'/> <vcpupin vcpu='6' cpuset='13'/> <vcpupin vcpu='7' cpuset='29'/> <vcpupin vcpu='8' cpuset='14'/> <vcpupin vcpu='9' cpuset='30'/> <vcpupin vcpu='10' cpuset='15'/> <vcpupin vcpu='11' cpuset='31'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-4.2'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='6' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img' index='4'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows/Windows.iso' index='3'/> <backingStore/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <alias name='sata0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.173-2.iso' index='2'/> <backingStore/> <target dev='hdb' bus='sata'/> <readonly/> <alias name='sata0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-WDC_WD30EZRX-00DC0B0_WD-WCC1T1216530' index='1'/> <backingStore/> <target dev='hdd' bus='sata'/> <alias name='sata0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0xa'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0xb'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0xc'/> <alias name='pci.5'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0xd'/> <alias name='pci.6'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:bb:7b:5f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-14-Windows 10/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <hostdev mode='subsystem' type='pci' managed='yes' xvga='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x41' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <rom file='/mnt/user/isos/Sapphire.RX570.8192.180123_1.rom'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x41' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x1'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain>
  10. Hi All, Is there a way to install a second mac vm with macinabox? Also in vnc mojave I can download updates, but it will not install said update...is that a bug or a config issue?
  11. I have passed thru a hdd and installed games on there and get same result....fail to load
  12. Doesnt give one............Someone on discord unraid kvm section said I need a hdmi dummy plug
  13. Ok, solved my problem of passing through gpu Now when Im in VM the Gforce GTX 1050Ti in the device manager has a warning ! on it I downloaded nvidia drivers for my card, installed and still the warning exist, and accessing via splashtop my screen refresh is laggy and screen resolution is locked to 640x480
  14. Sorry for this guys, my server runs well, other than trying to passthrough my gpu with sound
  15. Ok, now I get no errors and have started win10 vm, splashtop not connecting to vm how can I tell if win10 vm has launched?
  16. Its exact model thats on gpu box as ive downloaded from techpowerup
  17. In what way? its recent as of May 2019, but not the most recent bios
  18. I have a feeling its got something to do with my xml file for windows 10 VM
  19. tower-diagnostics-20200123-2201.zip I basically installed Windows 10 VM, installed with VNC graphics and was working, then powered down the VM, then I changed my setup to pass through my 1050Ti video card and sound, I used the vbios from techpowerup and took out the header added the rom file code (file location) etc into my xml code Then started my VM and thats were I get "Unknown PCI header type '127' for device"
  20. Hi All, followed spaceinvaderone's video on passing through video card in win10 vm with modified vbios, now I get error internal error: Unknown PCI header type '127' for device(edited) any ideas please