System instability after replacing motherboard

[magicman32]

Hi All

What got me to this point

 

my motherboard m.2 ssd slots died, wasnt detecting ssd (sent back to manufacturer and confirmed dead)

 

so I ended up buying a new motherboard, installed, posted

 

would get an hour or two installing some docker containers, first was plex

 

I was able to add libraries ok, but after a while plex was freezing up while downloading metadata

 

then unraid would become unresponsive, Id click on reboot server, nothing happend, so I had to hard reboot

 

then happened a few times...I would delete my docker image and reformat my cache drives and same result

 

plex would freeze up and then unraid would become unstable

 

When my m/b died I was thinking maybe corrupted ssds

So I took them out and added a 2.5in ssd I had laying around as new cache drive

reinstalled appdata backup

get plex up and running (fresh docker image)

from time to time it becomes unresponsive and says it cant find my plex server (almost like network drops out)

 

Could my array hdds be corrupted?

 

I am currently running memtest86 via flash boot and have 21 errors 90% complete

could this cause system instability?

 

Im not sure what to check at this stage

 

Included are my diagnotic file, any help would be great........

 

 

 

 

I am currently running 6.9.2

asrock x399 threadripper m/b

2950x threadripper cpu

thebeast-diagnostics-20211128-1935.zip

Edited November 28, 2021 by magicman32

[magicman32]

anyone?

[JorgeB]

Start here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

 

[magicman32]

Its been running like clockwork for 18 months now with 2nd gen threadripper at 3200mhtz

[JonathanM]

1 hour ago, magicman32 said:

Its been running like clockwork for 18 months now with 2nd gen threadripper at 3200mhtz

That was then. Is it stable now?

[magicman32]

no, memory was bad, in process of being replaced

[magicman32]

But thinking I may go 2666mhtz when I order replacements