poto2 Posted December 2, 2021 Share Posted December 2, 2021 Took opportunity to pickup extra license during "black friday" special, and having a bit of trouble setting up spare installation. Flash drive is 16gb Sandisk Ultrafit, boots fine using legacy mode to Pro 6.9.2 txt login, but no luck booting to gui mode. Motherboard is SM X10SRL, bios & BMC updated to latest version. Tried adding "nomodeset" to syslinux.cfg, but did not help. BMC is Aspeed ast2400. Main unraid fileserver uses SM X10SRM, same BMC version & f/w, boots to gui mode no problem. Hopefully someone with sharper eyes can point me toward a fix, diagnostics attached. Thanks! unraid-three-diagnostics-20211202-1336.zip Quote Link to comment
ljm42 Posted December 3, 2021 Share Posted December 3, 2021 Can you provide diags for the system that works? It might help to compare them Quote Link to comment
poto2 Posted December 3, 2021 Author Share Posted December 3, 2021 1 hour ago, ljm42 said: Can you provide diags for the system that works? It might help to compare them Here are the diags for system with local gui mode working. unraid-one-diagnostics-20211202-2349.zip Quote Link to comment
ljm42 Posted December 3, 2021 Share Posted December 3, 2021 On unraid-three, open a web terminal and type: touch /boot/config/modprobe.d/ast.conf This is needed in Unraid 6.9.x to enable the graphics card: https://wiki.unraid.net/Manual/Release_Notes/Unraid_OS_6.9.0#GPU_Driver_Integration unraid-one does not have "nomodeset", so you can remove that from unraid-three if the hardware is the same. Then reboot Quote Link to comment
poto2 Posted December 3, 2021 Author Share Posted December 3, 2021 Thanks for refreshing my memory - I must have made that change on main server then forgot about it. Once ast.conf created gpu mode enabled, as expected. I appreciate the assistance.👍 Quote Link to comment
ljm42 Posted December 3, 2021 Share Posted December 3, 2021 great! hope you enjoy your second license Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.