Adding Z Wave USB logs out and missing key file

[0plus6]

All working as should until I add a Z Wave USB and pass through to Home Assistant VM. After some time I am signed out and get a "missing key file" error. If I try and sign back in I get error "Failed to receive latest server info after successful key install. Please close this pop-up and refresh the webGUI."

 

What am I missing? Any help would be appreciated. Thank you

 

Unraid OS Pro

Version 6.9.2

 

 

[SimonF]

37 minutes ago, 0plus6 said:

All working as should until I add a Z Wave USB and pass through to Home Assistant VM. After some time I am signed out and get a "missing key file" error. If I try and sign back in I get error "Failed to receive latest server info after successful key install. Please close this pop-up and refresh the webGUI."

 

What am I missing? Any help would be appreciated. Thank you

 

Unraid OS Pro

Version 6.9.2

 

 

Sounds like the boot drive is being disconnected.  Can you post diagnostics

Edited January 15, 2022 by SimonF

[0plus6]

I had to remove the Z Wave USB and reboot. Luckily everything came back up. I will plug it back in and grab the diagnostics once it errors out again.

 

Additional: My flash boot device shows as it should in the main tab but when viewing files, there are no files. It does show size, used and free sizes unchanged however.

 

Thank you

[0plus6]

Took a while, but finally went down again. Diagnostics attached.

 

Thank you!diagnostics-20220118-0906.zip

 

Edit: Also seeing errors on dashboard

 

Warning: parse_ini_file(/boot/config/docker.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 50

Warning: array_replace_recursive(): Expected parameter 2 to be an array, bool given in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 50

Warning: parse_ini_file(/boot/config/domain.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix.vm.manager/include/libvirt_helpers.php on line 478

Edited January 18, 2022 by 0plus6
Additional info

[itimpi]

It looks as though your flash drive has dropped offline.

[0plus6]

This has happened with 2 different Boot Devices. I thought the first was failing so I swapped out for a new and it keeps happening every time I add a Z Wave USB device. I've tried the Zooz and Aeotec. Both having the same effects.

[SimonF]

1 hour ago, 0plus6 said:

This has happened with 2 different Boot Devices. I thought the first was failing so I swapped out for a new and it keeps happening every time I add a Z Wave USB device. I've tried the Zooz and Aeotec. Both having the same effects.

May be a power issue on the ports, ZWave taking to much. See ifconnecting into a different bus has the same effect.

 

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 045e:07f8 Microsoft Corp. Wired Keyboard 600 (model 1576)
Bus 001 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 001 Device 006: ID 0b05:18f3 ASUSTek Computer, Inc. AURA LED Controller
Bus 001 Device 010: ID 0658:0200 Sigma Designs, Inc. 
Bus 001 Device 009: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 005: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 004: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 

[0plus6]

I will give this a try. Thank you!