Can't connect to login screen

[jbbrandes]

Hoping somebody can help me out here.

 

I can reach my unRaid files by a link to the contents, but I can't access the login screen to perform housekeeping chores and activities.

I'm accessing it via the url bar: <server_name>/login

 

All I get is:

 

Hmmm… can't reach this page

Check if there is a typo in fred.

If spelling is correct, try running Windows Network Diagnostics.

DNS_PROBE_FINISHED_NXDOMAIN

 

I've tried changing settings but I'm not having any luck. Can anybody help? 

 

[Squid]

Can you reach it via using the IP address?

 

https://ipAddress

 

(NOTE: you must actually enter in https)

[jbbrandes]

I enter in http://fred/login

I get the following...

     Hmmm… can't reach this page

     Check if there is a typo in fred.

     Search Bing for fred

     If spelling is correct, try running Windows Network Diagnostics.

     DNS_PROBE_FINISHED_NXDOMAIN

 

It seems to recognize "fred" (the name of the server) but not login. (I've also tried logon)

I have a bookmark for this that used to work. but no longer.

[itimpi]

1 minute ago, jbbrandes said:

I enter in http://fred/login

I get the following...

     Hmmm… can't reach this page

     Check if there is a typo in fred.

     Search Bing for fred

     If spelling is correct, try running Windows Network Diagnostics.

     DNS_PROBE_FINISHED_NXDOMAIN

 

It seems to recognize "fred" (the name of the server) but not login. (I've also tried logon)

I have a bookmark for this that used to work. but no longer.

Does it work if you omit the ‘login’ part?    It should not be necessary.

[Squid]

4 minutes ago, jbbrandes said:

I enter in http://fred/login

 

 

On 1/28/2022 at 5:05 AM, Squid said:

Can you reach it via using the IP address?

 

https://ipAddress

 

(NOTE: you must actually enter in https)

(and accept the certificate warning that will result)

[jbbrandes]

Omitting "login" yields the same result.

 

I just want to make sure I'm clear about the problem.

• I am able to access the contents/file system of the server of the server.
• I am not able to connect to the server via login so that I can access the dashboard and perform system administrative and housekeeping functions. (parity checking, updating packages, etc)

-John

 

[jbbrandes]

 

http://192.168.0.13 yields the following result.

 

Hmmm… can't reach this page

192.168.0.13 refused to connect.

Try:

Checking the connection

Checking the proxy and the firewall

ERR_CONNECTION_REFUSED

Hide details

Check your Internet connection

Check your network cables, modem, and routers.

Allow Microsoft Edge to access the network in your firewall or antivirus settings.

If it's already listed as a program allowed to access the network, try removing it from the list, and adding it again.

If you use a proxy server:

Check your proxy settings. You might need to ask your organization if the proxy server is working. If you don't think you should be using a proxy server, go to Settings > System > Open your computer's proxy settings

[Squid]

Just now, jbbrandes said:

 

http://192.168.0.13

 

On 1/28/2022 at 5:05 AM, Squid said:

Can you reach it via using the IP address?

 

https://ipAddress

 

(NOTE: you must actually enter in https)

 

I can't tell if you just typed it wrong in the message or not.  Try https

[jbbrandes]

sorry, I typed too fast,

 

I entered as follows...  https://192.168.0.13 and got the message as above.

Im looking in the firewall and don't see anything wrong.

[Squid]

OK.  Just what I was looking for happened to be one common cause for inability to connect

 

Do you have a keyboard / mouse attached to the server?  Can you log in at the command prompt and then enter in 

diagnostics

The zip file will get saved onto the flash drive (logs folder)

Powerdown, pull the flash drive and post the the zip here

powerdown

 

[jbbrandes]

I'm copying some files now, but once done I can do that,

On a side note, I'm finally able to access the logon screen by typing 

http://198.162.0.13/login   It just started working all of a sudden. I don't know why

 

http://fred/login

https://fred/login

http://192.168.0.13/login

https://192.168.0.13/login

https://192.168.0.13

or any of the others still don't work. I'm at a loss to explain any of this. 

[jbbrandes]

You want me to run "diagnostics" from a linux command prompt, correct? 

I'll have to power down and power up with a head attached to do this.

[Squid]

Yes.  If you've now got access to the WebUI, it's easier from Tools - Diagnostics