SeattleBandit Posted February 2, 2022 Share Posted February 2, 2022 So i'm moving all my stuff from a 'gravity rack/stack' (wire shelves from ace) to a proper rack - with a nice 48 port switch and patch panel etc etc etc running a supermicro 24bay hot swap chassis last night i pulled what i thought was an empty bay (i got lazy with my label maker apparently) from my live array - when i realized my mistake i brought my stack down, plugged the drive in - brought everything back up - and now my disk 5 is unhappy and is disabled and all data is running emulated. It is reading the drive and smart health - i'm currently running the extended/full smart test - only 45% complete - my question is once the smart test is complete and (i'm assuming) says there are no issues - how do i go about making disk 5 happy and healthy so i can bring my array back to full strength?? last nigth before kicking off the complete smart test i booted into maintennance mode and ran the check disk and it didn't seem to throw any errors? i'm not sure how to read that report - but it looked mostly similar to a report i ran on a healthy disk what should my next steps be? unfortunately my syslog is swamped with the below (running a couple SAS drives which i believe are causing this) i'm preclearing new drives to replace my sas drives which will hopefully fix the below Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Quote Link to comment
JorgeB Posted February 2, 2022 Share Posted February 2, 2022 24 minutes ago, SeattleBandit said: how do i go about making disk 5 happy and healthy so i can bring my array back to full strength?? Assuming the emulated disk is mounting and contents look correct: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself Quote Link to comment
SeattleBandit Posted February 2, 2022 Author Share Posted February 2, 2022 29 minutes ago, JorgeB said: Assuming the emulated disk is mounting and contents look correct: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself boom - simple as that - thanks for the info - once the smart is done i'll just rebuild - thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.