DaPedda Posted February 3, 2022 Share Posted February 3, 2022 Hello Community, I have since some days this problem: two harddisks bring me after 2h - 8h Disk I/O Error (after Server reboot) These two harddisks are connected to a HBA 9211-8i with unRaid 6.9.2 Interestingly, my array (connected to the internal SATA port) has exactly the same read performance as the two failed disks. I created a new disk configuration yesterday, but the error is back since this morning. Please, who can give me a tip on how to narrow down the error further? Thank you very much Peter Quote Link to comment
Squid Posted February 3, 2022 Share Posted February 3, 2022 You should post your entire diagnostics Quote Link to comment
DaPedda Posted February 3, 2022 Author Share Posted February 3, 2022 (edited) Here we go..... and thanks for Help Edit: Diag removed Edited February 4, 2022 by DaPedda Quote Link to comment
Squid Posted February 3, 2022 Share Posted February 3, 2022 Taking a guess it looks like sdm dropped offline and became sdp However neither are showing up in the smart reports, so it appears that it dropped for good. Reseating cabling is your first step. Quote Link to comment
DaPedda Posted February 4, 2022 Author Share Posted February 4, 2022 17 hours ago, Squid said: Taking a guess it looks like sdm dropped offline and became sdp However neither are showing up in the smart reports, so it appears that it dropped for good. Reseating cabling is your first step. Thank you for your help. I will move all Toshibas to a new case with new HBA cards and new cables this weekend. Then we will see. I'll report back and then close the post if all is well. Quote Link to comment
DaPedda Posted February 7, 2022 Author Share Posted February 7, 2022 Last Friday I replaced the cable set and both HDD's were running all weekend, until 10:00 AM this morning. Tonight I have now installed another COntroller, a Dell H200. Now I wait again and report back 😉 Quote Link to comment
Solution DaPedda Posted February 13, 2022 Author Solution Share Posted February 13, 2022 Conclusion: this was now my second HBA card which failed. With the Dell H200 and the old cable set I have no problems so far. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.