momsz Posted February 16, 2022 Share Posted February 16, 2022 Hi i upgradeed my server to asrock x99 extrema 4(3.80 bios version) and 2697 v3 whit 32 gb ddr4 rdimm 2333 mhz and a have lot off crash when i want start win 10 vm 2th time since the host start. (1. vm start OK -> i stop vm OK no error log -> 2. vm start vm crash and the host unreachabel i need restart.) After crash the host server i need to enable vm in setting. i got this error simtimes Quote feb 16 10:37:30 lelopo-maxi kernel: pcieport 0000:00:02.0: aer: uncorrected (non-fatal) error received: 0000:00:02.0 feb 16 10:37:30 lelopo-maxi kernel: pcieport 0000:00:02.0: pcie bus error: severity=uncorrected (non-fatal), type=transaction layer, (requester id) feb 16 10:37:30 lelopo-maxi kernel: pcieport 0000:00:02.0: device [8086:2f04] error status/mask=00004000/00000000 And today i found this. Quote device descriptor read/64, error -110 I repleced pendrive and cmos battery see if it solves the problem. I have quadro t400 for h265 coding, and i have amd rx 5500 xt for win10 vm. I make coustom kernel with Unraid-Kernel-Helper for gnif Vendor-Reset Patch. I make 24h memtest86 but nothing I added pcie_aspm=off fleg to flesh config and aspm is turn off from bios. lelopo-maxi-diagnostics-20220216-1242.zip Quote Link to comment
Squid Posted February 16, 2022 Share Posted February 16, 2022 10 minutes ago, momsz said: I make coustom kernel with Unraid-Kernel-Helper for gnif Vendor-Reset Patch. You should revert to a stock OS image and use the Vendor Reset driver in Apps instead Quote Link to comment
momsz Posted February 16, 2022 Author Share Posted February 16, 2022 8 minutes ago, Squid said: You should revert to a stock OS image and use the Vendor Reset driver in Apps instead I don't find it Quote Link to comment
momsz Posted February 16, 2022 Author Share Posted February 16, 2022 I need to update 6.10-rc2 ? Quote Link to comment
momsz Posted February 16, 2022 Author Share Posted February 16, 2022 I update to 6.10 and instaled the vendore driver and i got this after instarted vm Quote Link to comment
momsz Posted February 16, 2022 Author Share Posted February 16, 2022 i bound my rx5500 gpu and sound card and x99 sound card and usb 3 hub wgit vfio and itt start. But when i resart the vm is it crashed and crashed the host to. i need to push resetbutton to restart becouse no gui and ssh and not response keyboard to. This is my log before crash https://pastebin.com/3pibiVAW Quote Link to comment
momsz Posted February 16, 2022 Author Share Posted February 16, 2022 i find this in may log Quote AMD_NAVI14: reset result = 0 Quote Link to comment
momsz Posted February 16, 2022 Author Share Posted February 16, 2022 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: version 1.1 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: performing pre-reset Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: performing reset Feb 16 15:24:36 Lelopo-Maxi kernel: ATOM BIOS: xxx-xxx-xxx Feb 16 15:24:36 Lelopo-Maxi kernel: vendor-reset-drm: atomfirmware: bios_scratch_reg_offset initialized to 4c Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: bus reset disabled? yes Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: SMU response reg: 0, sol reg: 0, mp1 intr enabled? no, bl ready? yes Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: performing post-reset Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: reset result = 0 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x19@0x270 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x25@0x400 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x26@0x410 Feb 16 15:24:36 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x27@0x440 Feb 16 15:24:40 Lelopo-Maxi kernel: vfio-pci 0000:00:1b.0: enabling device (0000 -> 0002) Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: version 1.1 Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: performing pre-reset Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: performing reset Feb 16 15:24:43 Lelopo-Maxi kernel: ATOM BIOS: xxx-xxx-xxx Feb 16 15:24:43 Lelopo-Maxi kernel: vendor-reset-drm: atomfirmware: bios_scratch_reg_offset initialized to 4c Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: bus reset disabled? yes Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: SMU response reg: 0, sol reg: 0, mp1 intr enabled? no, bl ready? yes Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: performing post-reset Feb 16 15:24:43 Lelopo-Maxi kernel: vfio-pci 0000:04:00.0: AMD_NAVI14: reset result = 0 Quote Link to comment
Squid Posted February 16, 2022 Share Posted February 16, 2022 3 hours ago, momsz said: I need to update 6.10-rc2 ? My bad I didn't realize it was 6.10+ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.