T_Matz Posted February 27, 2022 Share Posted February 27, 2022 Im new to unraid, and I am having issues with my 10G NIC. It is generating firmware errors in the logs and I am not sure how to fix the issue. The error is: Feb 27 15:43:01 Tower kernel: ixgbe 0000:03:00.0: Warning firmware error detected FWSM: 0x00000000 ethernet card: Intel E10G42BT X520-T2 MOBO: ASROCK x570 Pro4 CPU: AMD 3900X Quote Link to comment
oval media Posted February 28, 2022 Share Posted February 28, 2022 I'm facing similar problem, im gating 100Mbps. i hope to find solution for this issue? M/B: ASRockRack X399D8A-2T CPU: AMD Ryzen Threadripper 2920X 12-Core @ 3500 MHz Cache: 1152 KiB, 6 MB, 32 MB Memory: 64 GiB DDR4 Multi-bit ECC Network: eth0: 100 Mbps, full duplex, mtu 1500 (2x 10GbE Intel X550-AT2 NIC) Kernel: Linux 5.10.28-Unraid x86_64 Quote Link to comment
T_Matz Posted March 1, 2022 Author Share Posted March 1, 2022 Here is what I am looking at. You have the same issue as mine, your eth1 interface is down. I dont know how to change that to up. I went into the ssh and put in ifconfig -eth1 up it didnt give me a error code but if i do a lshw command it states the ports are disabled. if i plug a cable into the disabled prots it spits out a firmware issue in the logs as well. Quote Link to comment
T_Matz Posted March 1, 2022 Author Share Posted March 1, 2022 Thank you @zoggyI will downgrade my server OS version and see if that helps. I will report back if it does or does not. Quote Link to comment
T_Matz Posted March 5, 2022 Author Share Posted March 5, 2022 This did not help and i had to remove the 10G NIC. It was causing issues with even the onboard NIC. Once removed i havent had any issues with the onboard NIC. But that is only 1 gigabit. I havent found anything to get this card to work, does anyone have a suggestion for a card that would work? Quote Link to comment
oval media Posted March 11, 2022 Share Posted March 11, 2022 Hi T_matz, It is really strange. I have one of these Intel X540-AT2 (rev 01). It is working fine, I really like about this card is that it has two controller. But I'm not getting more than 235mbps, do anyone have a suggestion to get beet better performance out of this config? my expatiation around 900 to 1000mbps. This is my test server config Intel® Xeon® CPU E5-4650 0 @ 2.70GH, DDR 32GB ECC, Intel X540-AT2 (rev 01) 10G, Seagate ST12000NM002G 12 TB SAS x12, Parity 2x12TB, Cache 2x1TB SSD. Quote Link to comment
T_Matz Posted March 11, 2022 Author Share Posted March 11, 2022 Wow you aren't having any issues with your NIC? I think I'll have to just get a new NIC for my server, does anyone know of a list of known working NICs Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.