vernaz92 Posted March 6, 2022 Share Posted March 6, 2022 (edited) Hello, I have recently migrated my server to a new system with HD hotswap sleds and SAS backplane and I have had one of my array disks throwing some read errors and going in Disabled state. I had recovered it already once by removing it, readding it to the array and running disk reconstruction but it happened now a second time in a short time span (and coincidentally never had any issues with this drive until I migrated everything) so I am starting to suspect there is something wrong from the HW side. The SAS backplane is an LSI2208 but I have flashed the firmware to IT mode in order to get the drives to be read by system (followed the guide here and had no issues). All the other drives had no issues and this particular drive had no SMART errors as far as I can see. Is it just a connection problem and I should just try to reseat the drive (or maybe change the slot I am using) or is there something more serious behind it? Drives are all fairly new (almost 2 years old) so I am hoping its not already drive failure (diagnostics attached). Thanks a lot in advance and let me know if you need any more info! clochenas-diagnostics-20220306-1815.zip Edited March 9, 2022 by vernaz92 Added link to guide followed Quote Link to comment
trurl Posted March 6, 2022 Share Posted March 6, 2022 Disable spindown on the disk and run an extended SMART test Quote Link to comment
vernaz92 Posted March 7, 2022 Author Share Posted March 7, 2022 Thanks (sorry for the delay, run it overnight) - I run the extended test on all disks and all passed without error. Attached is the report for the Disk 2 (the one that gave the read error in the first place). clochenas-smart-20220307-1152.zip Quote Link to comment
Solution JorgeB Posted March 7, 2022 Solution Share Posted March 7, 2022 See below: Quote Link to comment
vernaz92 Posted March 7, 2022 Author Share Posted March 7, 2022 Thanks for helpful info @JorgeB, looks like this might be the culprit. I will give it a shot and monitor the situation in the coming days; will keep you posted. Quote Link to comment
vernaz92 Posted March 9, 2022 Author Share Posted March 9, 2022 Server has been up for a few days now and have not had errors so far, looks like issue is solved for now. Thanks again for the help! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.