stor44 Posted March 7, 2022 Share Posted March 7, 2022 (edited) Hi there. I started a parity check today, and a couple minutes in Disk 3 of my array drives suffered the Red X. I cancelled the parity check. Diagnostics attached. I could use help reading the SMART reports for the drive, and if there's anything else that looks like trouble. Thanks for any advice. tower-diagnostics-20220307-0443.zip Edited March 9, 2022 by stor44 SOLVED Quote Link to comment
Solution JorgeB Posted March 7, 2022 Solution Share Posted March 7, 2022 It's not logged as a disk issue, and the disk looks healthy, check/replace cables or swap slots and if the emulated disk is mounting rebuild on top. 1 Quote Link to comment
stor44 Posted March 9, 2022 Author Share Posted March 9, 2022 Thanks for that Jorge. I was able to shutdown unRAID, re-check the cables and swap the one to Disk 3 with a new cable. I booted back up and followed the wiki here to rebuild a failed drive to itself. A few minutes in, Disk 5 got a Red X as well. I let the rebuild finish so Disk 3 would be fixed, and then swapped a new cable in for Drive 5 and rebuilt to that drive as well. A couple long days, but I'm back to good now. Cheers. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.