mdrodge Posted March 30, 2022 Share Posted March 30, 2022 (edited) Since I upgraded my file server to 6.10 rc3 I've lost compatibility with my 2.5gb Nic. (Chipset: RTL8156 MODEL: StarTech.com 2.5Gb/s USB 3.0 Ethernet Nic adaptor) I upgraded to rc3, rebooted and then spent 30 minutes trying to connect and had to remove the network.cfg file and swap to the onboard lan. This is an ITX system and only has one slot and that is for the HBA so my only hope for decent network speeds is USB. The Nic is not detected by Unraid anymore but works just fine under Windows and has been a very stable in Unraid until now (1 year) it has a metal body and it is cooled by the psu fan so I am quite sure the issue is Unraid especially since it started exactly as I updated. ((((As a side note a different server I have has been crashing since rc2 and I've had to remove the pci-e 2.5gb nic. (not sure on model at the moment) (though this isn't conclusive yet, as it was every few weeks so I need a month long test)))) Edited June 14, 2022 by mdrodge updated title Quote Link to comment
mdrodge Posted March 30, 2022 Author Share Posted March 30, 2022 (edited) And to make it worse, moving back to rc2 didn't fix the issue. Though going back to stable has me running for now but I'll be stuck there until a fix is found. :) Edited March 30, 2022 by mdrodge Quote Link to comment
cb Posted April 22, 2022 Share Posted April 22, 2022 Hi mdrodge, I don't have the solution but with my hardware i have to revert to RC1 : [6.10RC4] MY ETH1 NETWORK DISAPEAR I don't know if I'm clear in my explanations in the post but maybe you have the same problem. If yes maybe an unraid / linux expert have a solution. Quote Link to comment
mdrodge Posted May 1, 2022 Author Share Posted May 1, 2022 (edited) On 4/22/2022 at 9:34 AM, cb said: Hi mdrodge, I don't have the solution but with my hardware i have to revert to RC1 : [6.10RC4] MY ETH1 NETWORK DISAPEAR I don't know if I'm clear in my explanations in the post but maybe you have the same problem. If yes maybe an unraid / linux expert have a solution. rc5 is supposed to fix the issue. I'll test it later (when the kids are asleep) if i don't comment in 24 hours then assume it's working or at least in testing but not broken enough to come back and update. Update..... still the same. no fix. Edited May 1, 2022 by mdrodge Quote Link to comment
mdrodge Posted June 14, 2022 Author Share Posted June 14, 2022 Update.... still broken in 6.10.3 1 Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 On 3/30/2022 at 4:59 PM, mdrodge said: And to make it worse, moving back to rc2 didn't fix the issue. And before it worked with -rc2? If yes it should keep working, please post the diagnostics from -rc2. Quote Link to comment
mdrodge Posted June 15, 2022 Author Share Posted June 15, 2022 2 hours ago, JorgeB said: And before it worked with -rc2? If yes it should keep working, please post the diagnostics from -rc2. It seems to mess up the network.cnfg file some how. It can't get diagnostic on it because it's offline until the network.cnfg has been removed and the lan cables swapped and new ip issued. I was told that this is a greater Linux issue though, something about the driver from Realtek apparently. Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 Possibly a driver issue, not uncommon with Realtek, but if you delete network.cfg and downgrade to -rc2 it works? Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 Quick search does indeed point to a problem in the in tree Linux driver, it's rumored next Unraid release will have a better way of installing/managing out of tree drivers, but that can take some time to be available. 1 Quote Link to comment
JorgeB Posted June 17, 2022 Share Posted June 17, 2022 FYI apparently there's a modded driver based on the Realtek out of tree driver that works (not tested by me): 1 1 Quote Link to comment
mdrodge Posted February 22, 2023 Author Share Posted February 22, 2023 (edited) Answer seems to be to get this from the apps tab RTL8152/3/4/6 USB Drivers By ich777 and add ethtool -s eth0 autoneg on advertise 0x80000000002f to the go file might need to change eth0 to suit @ich777 Thank You Edited February 22, 2023 by mdrodge 1 Quote Link to comment
mdrodge Posted July 1, 2023 Author Share Posted July 1, 2023 Another "stable" update that turns my servers in paperweights 6.12.2 (from 6.11.5) and even after restore something is broken (my guess is this same issue since the symptoms seem familiar) I'm to busy to follow every change log and spend hours reading at the moment witch is why I stick to stable releases right now but I don't believe this type of experience should qualify as stable in a paid product. The server in question only has plex and a 2.5gb nic. That's not a complex set up, it should be hands free. Instead it's off line again and no way of telling why. Quote Link to comment
mdrodge Posted July 1, 2023 Author Share Posted July 1, 2023 Hopefully just a reinstall of the nic driver... simple (after deploying the backup, deleting network.cfg, swapping nics, finding the ip, reupdating os, installing driver, swapping nic back, finding new ip, stopping array, configuring network settings, reboot with lan unplugged to prevent ip conflicts. just a few hours) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.