CGRFC1872 Posted April 23, 2022 Share Posted April 23, 2022 Hello, I have just upgraded the motherboard, cpu and ram in my machine i now have a Gigabyte b660 DS3H and a Intel core i7-12700f and 64gb ddr4 3200mhz ram The issue i am facing is that i cannot get the system to boot into the unraid os after following the getting started guide. This usb worked previously on the old server which had different hardware I have also followed another guide here trying various settings but to no avail Can anyone assist? Quote Link to comment
Solution JorgeB Posted April 23, 2022 Solution Share Posted April 23, 2022 Make sure UEFI boot is enable in Unraid, if the flash has a EFI- folder rename it to EFI Quote Link to comment
SimonF Posted April 23, 2022 Share Posted April 23, 2022 16 minutes ago, CGRFC1872 said: Hello, I have just upgraded the motherboard, cpu and ram in my machine i now have a Gigabyte b660 DS3H and a Intel core i7-12700f and 64gb ddr4 3200mhz ram The issue i am facing is that i cannot get the system to boot into the unraid os after following the getting started guide. This usb worked previously on the old server which had different hardware I have also followed another guide here trying various settings but to no avail Can anyone assist? Which OS version are you running you will need 6.10 for igpu support You will also need to force probe for the i915 driver have a look at the 12th Gen thread. You can do via syslinux, i915.conf in modprobe.d or install Intel gpu top, but you will need to blacklist i915 driver for this. Quote Link to comment
CGRFC1872 Posted April 23, 2022 Author Share Posted April 23, 2022 31 minutes ago, SimonF said: Which OS version are you running you will need 6.10 for igpu support You will also need to force probe for the i915 driver have a look at the 12th Gen thread. You can do via syslinux, i915.conf in modprobe.d or install Intel gpu top, but you will need to blacklist i915 driver for this. It is a cpu without integrated graphics. It's using a seperate gpu. I found the issue was the efi- folder and thankfully that has fixed it only now i cannot access the webpage for it Quote Link to comment
SimonF Posted April 23, 2022 Share Posted April 23, 2022 3 hours ago, CGRFC1872 said: It is a cpu without integrated graphics. It's using a seperate gpu. I found the issue was the efi- folder and thankfully that has fixed it only now i cannot access the webpage for it oops missed it was a f vers. At least Jorge had the solution. Quote Link to comment
CGRFC1872 Posted April 23, 2022 Author Share Posted April 23, 2022 19 minutes ago, SimonF said: oops missed it was a f vers. At least Jorge had the solution. No problem, im glad it’s all working. But now half my containers and plug-ins don’t have any internet access or access to the rest of the docker network or home network so I’m needing to get that sorted but unsure on how Quote Link to comment
SimonF Posted April 23, 2022 Share Posted April 23, 2022 2 minutes ago, CGRFC1872 said: No problem, im glad it’s all working. But now half my containers and plug-ins don’t have any internet access or access to the rest of the docker network or home network so I’m needing to get that sorted but unsure on how Which Unraid vers are you running. Quote Link to comment
CGRFC1872 Posted April 23, 2022 Author Share Posted April 23, 2022 2 minutes ago, SimonF said: Which Unraid vers are you running. 6.9.2 I believe, but planning on upgrading soon Quote Link to comment
SimonF Posted April 23, 2022 Share Posted April 23, 2022 9 minutes ago, CGRFC1872 said: 6.9.2 I believe, but planning on upgrading soon Maybe worth posting diagnostics, Do you have over clocking turned off? Quote Link to comment
CGRFC1872 Posted April 23, 2022 Author Share Posted April 23, 2022 1 minute ago, SimonF said: Maybe worth posting diagnostics, Do you have over clocking turned off? Yeah, the cpu doesnt support it and neiether does the motherboard homesrv-diagnostics-20220423-1926.zip Quote Link to comment
SimonF Posted April 23, 2022 Share Posted April 23, 2022 18 minutes ago, CGRFC1872 said: Yeah, the cpu doesnt support it and neiether does the motherboard homesrv-diagnostics-20220423-1926.zip 130.25 kB · 0 downloads Did you old system have 2 NICs? # Generated settings: IFNAME[0]="br0" BRNAME[0]="br0" BRSTP[0]="no" BRFD[0]="0" BRNICS[0]="eth0" PROTOCOL[0]="ipv4" USE_DHCP[0]="yes" DHCP_KEEPRESOLV="yes" DNS_SERVER1="1.1.1.1" USE_DHCP6[0]="yes" DHCP6_KEEPRESOLV="no" VLANS[0]="1" IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" PROTOCOL[1]="ipv4" USE_DHCP[1]="yes" VLANS[1]="1" SYSNICS="2" It looks like you have two bridge interfaces with one trying to use eth1 which i cannot find an interface for. There are two 10Gb interfaces with no active driver. 06:00.0 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b] Kernel modules: netxen_nic 06:00.1 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b] Kernel modules: netxen_nic Quote Link to comment
CGRFC1872 Posted April 23, 2022 Author Share Posted April 23, 2022 13 minutes ago, SimonF said: Did you old system have 2 NICs? # Generated settings: IFNAME[0]="br0" BRNAME[0]="br0" BRSTP[0]="no" BRFD[0]="0" BRNICS[0]="eth0" PROTOCOL[0]="ipv4" USE_DHCP[0]="yes" DHCP_KEEPRESOLV="yes" DNS_SERVER1="1.1.1.1" USE_DHCP6[0]="yes" DHCP6_KEEPRESOLV="no" VLANS[0]="1" IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" PROTOCOL[1]="ipv4" USE_DHCP[1]="yes" VLANS[1]="1" SYSNICS="2" It looks like you have two bridge interfaces with one trying to use eth1 which i cannot find an interface for. There are two 10Gb interfaces with no active driver. 06:00.0 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b] Kernel modules: netxen_nic 06:00.1 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b] Kernel modules: netxen_nic Yeah, The old system did. This one is supposed to have one 10gb nic and 1gb nic but the dac cable doesnt work so i've had to order another Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.