PeteyBoPetey Posted June 3, 2022 Share Posted June 3, 2022 Hi Guys, Installed a new Corsair Commander Pro and pcie USB 3.0 card. Unraid booted and worked ok, but VMs wouldn't start. I noticed that the USB controllers I had bound to the vfio to be passed through to the VMs had become unbound and had different identifiers. I get errors such as "unable to mount sda1" and "Can not bond:0" others I can't remember atm. Tried different usb ports etc. Can I start with a clean slate?. Can I down load Unraid 6.10.2 and see if it boots with a fresh install?. Will this write to, or corrupt the array?. Can I just overwrite the Config folder in 6.10.2 with my old config folder from my back up? TIA Peter Quote Link to comment
JorgeB Posted June 3, 2022 Share Posted June 3, 2022 17 minutes ago, PeteyBoPetey said: Can I down load Unraid 6.10.2 and see if it boots with a fresh install? Yes. 17 minutes ago, PeteyBoPetey said: Will this write to, or corrupt the array? No, you can re-assign the disks if you know the original positions or copy super.dat from the existing config folder on the flash drive. 19 minutes ago, PeteyBoPetey said: Can I just overwrite the Config folder in 6.10.2 with my old config folder from my back up? Yes, but that would basically be the same as using current flash. Quote Link to comment
PeteyBoPetey Posted June 3, 2022 Author Share Posted June 3, 2022 1 hour ago, JorgeB said: Yes. No, you can re-assign the disks if you know the original positions or copy super.dat from the existing config folder on the flash drive. Yes, but that would basically be the same as using current flash. Clean install is being treated as a trial, didn't seem to recognise the USB ID. Will this be resolved with the super.dat overwrite, or do I need to buy a licence key? So just to confirm, Download Unraid 6.10.2 Make bootable as administrator Overwite new super.dat with old super.dat Install USB and boot machine TIA Quote Link to comment
JonathanM Posted June 3, 2022 Share Posted June 3, 2022 24 minutes ago, PeteyBoPetey said: Clean install is being treated as a trial, didn't seem to recognise the USB ID. did you copy your license file? Quote Link to comment
PeteyBoPetey Posted June 3, 2022 Author Share Posted June 3, 2022 1 hour ago, JonathanM said: did you copy your license file? which one is the licence file? Quote Link to comment
PeteyBoPetey Posted June 4, 2022 Author Share Posted June 4, 2022 10 hours ago, JonathanM said: *.key Ok 90% of the way there. All the array drives are listed, copied Plus.key to new config folder. However, the cache drives are listed in unassigned devices, these have my VMs vdisks on them. I assume the need to be mounted in the correct order as well?. Can I just copy a file the same as super.dat with the array? Quote Link to comment
JorgeB Posted June 4, 2022 Share Posted June 4, 2022 Copy the pools folder from the old config, or just re-assign them. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.