Jackhigh Posted June 16, 2022 Share Posted June 16, 2022 (edited) I updated unraid from 6.9 to 6.10 after the reboot my 2 SSD drives are unrecognized both appear as unassigned drives but if i try to assign them to the correct disks unraid tells me its incorrect. echo1-diagnostics-20220615-2234.zip Edited June 16, 2022 by Jackhigh formatting Quote Link to comment
Solution trurl Posted June 16, 2022 Solution Share Posted June 16, 2022 00:11.5 RAID bus controller [0104]: Intel Corporation C620 Series Chipset Family SSATA Controller [RAID mode] [8086:a1d6] (rev 09) 00:17.0 RAID bus controller [0104]: Intel Corporation C620 Series Chipset Family SATA Controller [RAID mode] [8086:a186] (rev 09) 01:00.7 RAID bus controller [0104]: Hewlett-Packard Company Device [103c:193f] (rev 01) b2:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart Storage PQI SAS [9005:028f] (rev 01) DeviceName: Embedded RAID 1 Inconsistent identification of disks is just one of many reasons RAID controllers are NOT recommended with Unraid. Quote Link to comment
trurl Posted June 16, 2022 Share Posted June 16, 2022 Do you know that SSDs in the array can't be trimmed and can only be written at speed of parity disk? Quote Link to comment
trurl Posted June 16, 2022 Share Posted June 16, 2022 You will have to New Config to get your disks reassigned with their new identifications. Maybe not a permanent fix due to your RAID controllers. Quote Link to comment
Jackhigh Posted June 16, 2022 Author Share Posted June 16, 2022 i thought i had disabled the RAID controller. I was able to revert back to the previous version and everything did work but I will have to redo my config i guess in order to get things setup properly. thank you Quote Link to comment
JorgeB Posted June 17, 2022 Share Posted June 17, 2022 There were some changes in how devices are detected with some controllers, but you just need to do a new config, re-assign all devices to their original slots, check "parity is already valid" and start the array, this should be a one time thing. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.