Edgeman56 Posted August 4, 2022 Share Posted August 4, 2022 For that past 2 days or so my server is running at 100 percent cpu usage. I updated to the newest version today and I am still having the same problem. I attached the server log and the processes log also. I have tried stopping all apps and it seems to have very little effect. Not sure what the next step should be. Thanks for any help you can provide. server-syslog-20220804-1507.zip processes.txt Quote Link to comment
JorgeB Posted August 4, 2022 Share Posted August 4, 2022 Please post the diagnostics. Quote Link to comment
Edgeman56 Posted August 4, 2022 Author Share Posted August 4, 2022 Sorry about that here it is. server-diagnostics-20220804-1150.zip Quote Link to comment
JorgeB Posted August 4, 2022 Share Posted August 4, 2022 You have dockers unpacking files in those diags, high CPU usage is normal during that. Quote Link to comment
Edgeman56 Posted August 4, 2022 Author Share Posted August 4, 2022 I just put the server online so I will let it run for a bit and repost, it has just been pegging the cpu at 100 percent to the point the server shuts down. I will repost the diagnostics after 30 mins or so. Thank you for your input, and your time Quote Link to comment
Edgeman56 Posted August 4, 2022 Author Share Posted August 4, 2022 Here is the diagnostic file, the server has been up and running for 30mins or so and is pegged at 100%. So it shouldn't be startup programs. Thanks for the help. server-diagnostics-20220804-1240.zip Quote Link to comment
Solution JorgeB Posted August 4, 2022 Solution Share Posted August 4, 2022 Still unpacking going on, suggest you stop all dockers, wat a couple of minutes and see if the utilization goes back to normal, if not post new diags, if yest starting enabling the docker one by one. 1 Quote Link to comment
Edgeman56 Posted August 4, 2022 Author Share Posted August 4, 2022 Thank you for all the help, sabnzb is causing the server to lockup. I can now focus on what is wrong. Thanks for you help and time it is much appreciated. 1 Quote Link to comment
trurl Posted August 4, 2022 Share Posted August 4, 2022 I use NZBGet instead of SAB, but the principle is the same. Are you downloading and unpacking to cache? Or are array disks involved? I have 2 pools, cache and fast. I download to cache and unpack to fast. Then whatever 'arr moves them to the appropriate cached share. Quote Link to comment
Edgeman56 Posted August 4, 2022 Author Share Posted August 4, 2022 I have mine downloading and unpacking to cache, my problem was that the unpacker was hung up in that background and used all cpu until the server crashed, and then when it started up it would start all over again. Thanks to the help on here I have the problem resolved. And it is great to have a community that is so knowledgeable and willing to help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.