joshbgosh10592 Posted August 13, 2022 Share Posted August 13, 2022 I just updated from 6.10.0 to 6.10.3 immediately after doing a "shrink array" to replace an empty data drive with a much larger drive. I did select the "Parity is already valid" checkbox when I performed it Now, however, when I reboot the server, the array doesn't automatically start... The server is assigned a static IP address via it's NIC, and I have a somewhat complex NIC setup with two bonded (802.3ad) 10Gb NICs, two bonded (also 802.3ad) 1Gb NICs, as well as two other independent NICs with their own IPs. I'm wondering if the license check is happening before the NICs are activated? This wasn't an issue with any other version of unRAID though and I've had this setup since I believe 6.8. Quote Link to comment
JorgeB Posted August 13, 2022 Share Posted August 13, 2022 Unraid doesn't need internet to check the license, except for trial keys, and you still would have GUI access, you can try renaming /config/network.cfg and use the default DHCP setting to see if it works. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.