Werner Bober Posted October 9, 2022 Share Posted October 9, 2022 Hi, since the update to 6.11 (now the latest version 6.11.1) I have the third time a missing keyhole error. I have used a new flash drive and another USB port. But after a few days it's the same problem. The keyfile is missing and there are no VM or Docker tabs visible. The containers are running. If I reboot the system, something is ok for about two days. Is there a bug in 6.11? Can I downgrade to 6.10 ( there I don't had problems)? Regards Werner Quote Link to comment
JorgeB Posted October 9, 2022 Share Posted October 9, 2022 After you get that error download and post the diagnostics. Quote Link to comment
itimpi Posted October 9, 2022 Share Posted October 9, 2022 49 minutes ago, Werner Bober said: Hi, since the update to 6.11 (now the latest version 6.11.1) I have the third time a missing keyhole error. I have used a new flash drive and another USB port. But after a few days it's the same problem. The keyfile is missing and there are no VM or Docker tabs visible. The containers are running. If I reboot the system, something is ok for about two days. Is there a bug in 6.11? Can I downgrade to 6.10 ( there I don't had problems)? Regards Werner This sounds more like a problem of some sort at the hardware level. The requested diagnostics should allow for more informed feedback. Quote Link to comment
Werner Bober Posted October 9, 2022 Author Share Posted October 9, 2022 Hi, thanks for your quick reply. Attached is the diagnostic file. unraid-diagnostics-20221009-1320.zip Quote Link to comment
itimpi Posted October 9, 2022 Share Posted October 9, 2022 You definitely have an issue with the flash drive as you are getting error messages such as: Oct 9 13:20:31 unRAID kernel: FAT-fs (sda1): Directory bread(block 32768) failed Oct 9 13:20:31 unRAID kernel: FAT-fs (sda1): Directory bread(block 32769) failed and other ones that indicate failures trying to access files under /boot (which is where the flash drive is mounted). Could not tell whether the problem was the flash drive itself or something else that was causing it to go offline. Quote Link to comment
JorgeB Posted October 9, 2022 Share Posted October 9, 2022 Make sure you're using a USB 2.0 port. Quote Link to comment
Werner Bober Posted October 9, 2022 Author Share Posted October 9, 2022 OK, many thanks for your help. I'll try an USB port at the back. Maybe the controller of the front ports are defective. Yes, in unraid under /boot is nothing... I'll give a feedback if it's helped. Thanks again. Quote Link to comment
Werner Bober Posted October 9, 2022 Author Share Posted October 9, 2022 Yes, it's USB 2.0. But now I have only USB 3.0 ports. On the USB 2.0 ports I've the same failure (with the old and the new flash drive). Maybe the same controller... Quote Link to comment
Werner Bober Posted October 11, 2022 Author Share Posted October 11, 2022 Now I have tried a back USB 2.0 port. Since Sunday it works fine. Now the keyfile is missing again after reload the dashboard. I already made a BIOS update, checked the USB port settings in the BIOS. Everything is ok. Two days works fine, than the keyfile is missing. Now I will downgrade to 6.10. There I don't had problems. I'll give a feedback... Hopefully it helps. Quote Link to comment
Solution Werner Bober Posted October 17, 2022 Author Solution Share Posted October 17, 2022 Hi, something happend with the USB 2.0 port. Other devices (UPS, smart home antenna) working well, only the flash go offline after one or two days. Since five days I use a USB 3.1 port (same flash drive) and everything works well. Maybe I find out where the problem is. The main thing is that it is running again. Thanks again for your help. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.