nicholasserra Posted November 6, 2022 Share Posted November 6, 2022 Hey everyone thanks for looking. On version 6.9.2. Did a stupid thing and pulled a drive from hot swap while array was started. No read or writes happening. Immediately placed back in, but drive went red X. Smart OK everything passing. I know standard procedure seems to be "Rebuilding a drive onto itself" for this situation. But wondering if any process exists that basically says "trust the drive and the parity and just accept it's OK". Figured i'd ask before I go rebuild a 14TB that i'm 99.99% sure is just fine. Thanks! Quote Link to comment
trurl Posted November 6, 2022 Share Posted November 6, 2022 attach diagnostics to your NEXT post in this thread Quote Link to comment
nicholasserra Posted November 6, 2022 Author Share Posted November 6, 2022 Diagnostics attached, thanks! attic-diagnostics-20221105-2142.zip Quote Link to comment
Solution JorgeB Posted November 6, 2022 Solution Share Posted November 6, 2022 We usually recommend rebuilding, as long the emulated disk is mounting and contents look correct, other option is doing a new config but you'll need to do a parity check, and that will take as long as the rebuild. Quote Link to comment
trurl Posted November 6, 2022 Share Posted November 6, 2022 16 hours ago, nicholasserra said: pulled a drive from hot swap while array was started No point in attempting hot swap with array or pool devices since Unraid won't do anything with a disk until it is assigned, and you can't change assignments with the array started. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.