Keek Uras Posted November 7, 2022 Share Posted November 7, 2022 (edited) Hey folks. I tried to upgrade to 6.11.2 this morning and at reboot, my system keeps hanging at this screen: I've tried 4 different ports. Do you think my USB stick is hosed? Thanks! Edited November 7, 2022 by Keek Uras Quote Link to comment
Keek Uras Posted November 7, 2022 Author Share Posted November 7, 2022 (edited) I wanted to mention that I did put the USB drive into a Windows machine and I was not prompted to scan and fix. I could also browse the contents of the drive. Edited November 7, 2022 by Keek Uras Quote Link to comment
JorgeB Posted November 7, 2022 Share Posted November 7, 2022 Try with a different flash drive with a stock v6.11.2 install, no key needed, just to see if it boots. Quote Link to comment
Keek Uras Posted November 7, 2022 Author Share Posted November 7, 2022 45 minutes ago, JorgeB said: Try with a different flash drive with a stock v6.11.2 install, no key needed, just to see if it boots. If that works, what's the best way to restore my previous config and get back online? Quote Link to comment
JorgeB Posted November 7, 2022 Share Posted November 7, 2022 Redoing the flash drive should solve it in that case, backup, recreate, restore the config folder. Quote Link to comment
Solution Keek Uras Posted November 7, 2022 Author Solution Share Posted November 7, 2022 Turns out it was due to no keyboard being connected. It wasn't showing any messages on the screen but I plugged in the transceiver for a keyboard and it booted right in to unRAID. Thanks for the responses. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.