PikkonMG Posted December 18, 2022 Share Posted December 18, 2022 Having issues with network. Unable to connect to server. I have 4 ethernet ports and none of them are wanting to work. I don't know if an update broke it or if network card is going out. Was able to connect and get logs by changing port and plugin direct into my modem. ezra-diagnostics-20221218-0120.zip Quote Link to comment
JorgeB Posted December 18, 2022 Share Posted December 18, 2022 Link is currently on eth1, change the cable to eth0, or swap the NIC in Settings -> Network Settings -> Interface rules (Reboot required) Quote Link to comment
PikkonMG Posted December 18, 2022 Author Share Posted December 18, 2022 (edited) eth1 is only port I can somewhat get to work. I've also taken and deleted the network-rules.cfg and reset the network.cfg were eth1 in logs above is eth0 and it gets stuck in this bonded mode and still have same overall issue. Booted safe mode here is logs from a backup I just tried to restore from Generate Flash Backup dated 12/05/2022 reset the network.cfg ezra-diagnostics-20221218-1005.zip Edited December 18, 2022 by PikkonMG Quote Link to comment
JorgeB Posted December 19, 2022 Share Posted December 19, 2022 You should be able to 23 hours ago, JorgeB said: swap the NIC in Settings -> Network Settings -> Interface rules (Reboot required) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.