December 23, 20223 yr Hi, I moved the drives and flash drive to a new server. Same drives but when I select them it shows as 'Wrong Disk' even though that is the right disks. I followed the Spaceinvader1 tutorial to do it. Diagnostics attached. thanks! executor-diagnostics-20221223-1446.zip
December 23, 20223 yr Solution Did you also move the RAID card over or did the new server have a RAID onboard and you then created a new JBOD arrays with it. RAID cards don't report the true serial numbers of the drives and basically append their own identifier to it. which is resulting in the system not identifying the drives as they were before. You should do a Tools - New Config. Then reassign all the drives into their appropriate places (make note of which is parity and which is data). You can also check off parity is already valid, but you should run a parity check regardless.
December 23, 20223 yr Author But 'new config' will erase the data on them? No, I didnt move the card. The old one didnt have raid.
December 23, 20223 yr Community Expert 51 minutes ago, Trackpads said: But 'new config' will erase the data on them? No, I didnt move the card. The old one didnt have raid. No it does not. The New Config is documented here in the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.