Jump to content

Graphics Card not Showing in VM Setup menu or anywhere in Unraid


Go to solution Solved by Rkpaxam,

Recommended Posts

Hi

 

I cant get my Graphics card to Show on the list when trying to set up my Vms.

Bios is set up to integrated Graphics (IGD) , fast boot disabled, and UEFI turned off (Cant boot with it on)

i do get display though the card some sort of terminal type screen on HDMI 1 and the main IGD DVI port is working on HDMI 2 so they are not showing the same thing.

 

Virtualisation for Intel is enabled also

 

 

GPU is not showing up in unraid anywhere either which is odd as it worked on my old setup fine before i changed MB - but again the card is being read in bios so im very confused so it must work for the fact i have some sort of video output and the bios is reading it... so why isnt unraid

 

GPU - AMD Radeon HD 6770

 

Manufacturer:Intel Corporation

Product Name:DQ67SW

Version:AAG12527-310

Serial Number:BQSW145000A8

Asset Tag:To be filled by O.E.M.

Features:Board is a hosting board

Board is replaceable

Location In Chassis:To be filled by O.E.M.

Type:Motherboard

 

Socket Designation:SKTH

Type:Central

Family:Core i7

Manufacturer:Intel® Corp.

Signature:Type 0, Family 6, Model 42, Stepping 7

Flags:FPU (Floating-point unit on-chip)

VME (Virtual mode extension)

DE (Debugging extension)

PSE (Page size extension)

TSC (Time stamp counter)

MSR (Model specific registers)

PAE (Physical address extension)

MCE (Machine check exception)

CX8 (CMPXCHG8 instruction supported)

APIC (On-chip APIC hardware supported)

SEP (Fast system call)

MTRR (Memory type range registers)

PGE (Page global enable)

MCA (Machine check architecture)

CMOV (Conditional move instruction supported)

PAT (Page attribute table)

PSE-36 (36-bit page size extension)

CLFSH (CLFLUSH instruction supported)

DS (Debug store)

ACPI (ACPI supported)

MMX (MMX technology supported)

FXSR (FXSAVE and FXSTOR instructions supported)

SSE (Streaming SIMD extensions)

SSE2 (Streaming SIMD extensions 2)

SS (Self-snoop)

HTT (Multi-threading)

TM (Thermal monitor supported)

PBE (Pending break enabled)

Version:Intel® Core™ i7-2600K CPU @ 3.40GHz

Voltage:1.1 V

External Clock:100 MHz

Max Speed:3800 MHz

Current Speed:3400 MHz

Status:Populated, Enabled

Upgrade:Socket BGA1155

Serial Number:To Be Filled By O.E.M.

Asset Tag:To Be Filled By O.E.M.

Part Number:To Be Filled By O.E.M.

Core Count:4

Core Enabled:4

Thread Count:8

Characteristics:64-bit capable

 

 

 

Edited by Rkpaxam
Link to comment
13 hours ago, Rkpaxam said:

GPU is not showing up in unraid anywhere either which is odd as it worked on my old setup fine before i changed MB - but again the card is being read in bios so im very confused so it must work for the fact i have some sort of video output and the bios is reading it... so why isnt unraid

From your diagnostics, I can see it listed in lspci output. I can also see it being initialized in syslog

 

When you go to Tools tab, system devices, does it show up under PCI device listing. How are you trying to give it to the VM? 

Link to comment

HI Andy

 

doesnt appear to be showing up  - but again its being read in the bios fine

 

 

8086:0100]00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)

[8086:0101]00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)

[8086:0122]00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)

[8086:1c3a]00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)

[8086:1c3c]00:16.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family IDE-r Controller (rev 04)

[8086:1c3d]00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)

[8086:1502]00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)

[8086:1c2d]00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)

[8086:1c20]00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)

[8086:1c10]00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)

[8086:1c1c]00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)

[8086:1c26]00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)

[8086:244e]00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)

[8086:1c4e]00:1f.0 ISA bridge: Intel Corporation Q67 Express Chipset LPC Controller (rev 04)

[8086:1c02]00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 04)

[8086:1c22]00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)

[1002:68bf]01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 6750]

[1002:aa58]01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]

[1b21:1064]02:00.0 SATA controller: ASMedia Technology Inc. Device 1064 (rev 02)

[1033:0194]03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

[11c1:5811]04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70)

Link to comment
41 minutes ago, Rkpaxam said:

Hi Andy

 

i found i had PCIE ACS Override i unset this from "both" to Disabled but this hasnt helped either.

There are no IOMMU groups in the diags, do you have VT-d enabled in the bios?

 

If you click on sys info image.png in the menu bar does it show IOMMU enabled?

 

image.png

Link to comment

Its showing as disabled in there but its showing as active in the bios.

20230423_154611.thumb.jpg.c59dad1df4fdc0b75245c46ab553dd7d.jpg

 

6 hours ago, apandey said:

What i saw was not diagnostics. It just had your wireguard config in a zip. Diagnostics will never put that stuff there and all the stuff that is supposed to be in diagnostics zip wasn't there at all. Also the file wasn't named correctly to be a diagnostics file. How did you generate it? 

Created from the download diagnostics in tools, could be I attached the wrong file lol

Link to comment
  • 1 month later...
On 4/27/2023 at 1:52 AM, shpitz461 said:

For Intel, you just go to ark.intel.com and type the cpu name in the 'search specifications' box (e.g. 'i7-8700T').

It will show you the capabilities at the bottom of the page of each cpu.

You can also add cpu's to the comparison list and compare them, pretty neat.

was the cpu fixed that but still cant get passthrough working 

Link to comment
  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...