comet424 Posted May 29, 2023 Share Posted May 29, 2023 (edited) hi i have nothing but propfind and one options error and login i not sure whats going on? i recently changed motherboard and ram due to i had parity errors bit flips apparently and a corrupt disk1 due to bad ram but also found out malfunctioning board from a asus x570 strix motherboard with 32gb desktop ram 3200mhz to asus x570 tuf gaming motherboard with 32gb ECC ram 3200mhz i tried to keep things similar.. now i get errors now i never seen before so not sure if its due to motherboard switch or so but maybe you guys know my server is 192.168.0.3 and my desktop pc is 192.168.0.227 and i usually leave the unraid server open as i usually doing something on the webpage like krusader etc and i been moving files over from older 12tb drives to newer 14tb drives and running 3 14tb Preclear i find it kicks me out of the terminal well locks it up.. unraid is slow and if i ssh in after a minute or less it kicks me out root@Tardis:/mnt/user# cd /usr/local/emhttp/client_loop: send disconnect: Connection reset even my recyling bin is messed up i posted in the recyling bin page is there a scanner that scans the unraid to make sure things are all working ok... the fix common issues isnt finding any errors.. but something like a windows tweakers where it scans registeries and possible issues does unraid have something like that other then fix common issues here is a current diagnostic tardis-diagnostics-20230529-0917.zip Edited May 29, 2023 by comet424 Quote Link to comment
dlandon Posted May 29, 2023 Share Posted May 29, 2023 I'm seeing realtek NICs in your server. They are not recommended for Unraid. The Realtek drivers are not reliable in Linux because they are not well maintained. Intel NICs would be a better choice. This might be the cause of your GPFs. Quote Link to comment
dlandon Posted May 29, 2023 Share Posted May 29, 2023 I'm also seeing this: May 28 21:16:48 Tardis kernel: pci 0000:0d:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) I think that may be this device: 00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483] Subsystem: ASUSTeK Computer Inc. Starship/Matisse GPP Bridge [1043:87c0] Kernel driver in use: pcieport Quote Link to comment
comet424 Posted May 29, 2023 Author Share Posted May 29, 2023 ah ok i use the onboard nic for unraid and the real tek card i use for home assistant. so realtek is not updated at all? yet they make them? and the ```May 28 21:16:48 Tardis kernel: pci 0000:0d:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)``` what is that? and ```May 28 21:16:48 Tardis kernel: pci 0000:0d:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)``` whats that is that the LSI SAS Card and or the Expander Card I have in there? Quote Link to comment
comet424 Posted May 29, 2023 Author Share Posted May 29, 2023 (edited) im finding if i make access my server at 192.168.0.3 that be accessing the Intel nic i guess intel nic onboard network card if i have krusader open it closes and u gotta reconnect the connect button then stays open it just started this crap in the past day when i swapped board.. and ram what a headache i gotta figure out lol ugh the vnc keeps disconnecting Edited May 29, 2023 by comet424 Quote Link to comment
comet424 Posted May 29, 2023 Author Share Posted May 29, 2023 after a clean reboot my vnc connections are still disconnecting frustrating Quote Link to comment
miicar Posted October 23, 2023 Share Posted October 23, 2023 why do all these "propfind" error threads fade off into the sunset without a solution? For me its random throughout the day from a couple different computer ip's on the network. Some days it doesn't happen, then for a few days it happens 3 or 4 times.... heres the latest error today...they flood the log for a few lines, always show IP's from 2 or 3 of the same PC's, and block up SMB access from the other PC's on the network for a few seconds...super weird. Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729068 limiting requests, excess: 20.130 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)" Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729071 limiting requests, excess: 20.076 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)" Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729073 limiting requests, excess: 20.055 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)" Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729075 limiting requests, excess: 20.033 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)" Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729077 limiting requests, excess: 20.011 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.