derbe Posted June 17, 2023 Share Posted June 17, 2023 HI, I have since some month issues with Unraid, it's after 2/3 weeks not reachable, so I need to start it. I Downloaded the logfiles, but for me it looks like that it only have logs which are after the crash and reboot are availabel , so I can't see what happed. I'm not on new intel I have i5-9400 CPU so this should not be an issue. Please let me know what I can do to get logs with crertent information which I can pass to the forum here. Local syslog server is anebaled and set to 100 MB. But I can't see any logs on the location I set up. Thanks Quote Link to comment
trurl Posted June 17, 2023 Share Posted June 17, 2023 24 minutes ago, derbe said: Local syslog server is anebale Post a screenshot of those settings. Quote Link to comment
trurl Posted June 17, 2023 Share Posted June 17, 2023 Also post your Diagnostics Quote Link to comment
derbe Posted June 18, 2023 Author Share Posted June 18, 2023 I can post Diagnostic, but it only show any log after the crash. Not sure if this helps. tower-diagnostics-20230617-2014.zip Quote Link to comment
itimpi Posted June 18, 2023 Share Posted June 18, 2023 37 minutes ago, derbe said: I can post Diagnostic, but it only show any log after the crash. Not sure if this helps. tower-diagnostics-20230617-2014.zip 114.48 kB · 0 downloads these syslog server settings only set up the server to receive syslog entries from elsewhere. If you want entries from this server you either use the Mirror to Flash option (best and easiest) or put the IP address of this server into the Remote syslog server field. Quote Link to comment
derbe Posted June 18, 2023 Author Share Posted June 18, 2023 I set now Mirror syslog to flash to "Yes" Quote Link to comment
derbe Posted July 18, 2023 Author Share Posted July 18, 2023 Okay, Server crashed now what should I do next? I rebooted it. How I can get the logs? When I download them, the logs start after crash. How can I access the Stick logs? Quote Link to comment
trurl Posted July 18, 2023 Share Posted July 18, 2023 8 hours ago, derbe said: How can I access the Stick logs? Simplest is to shutdown, put flash drive in your PC, copy logs to your PC. The contents of flash can also be accessed while still in a running Unraid server. You have to share it on the network in its settings. Quote Link to comment
derbe Posted July 23, 2023 Author Share Posted July 23, 2023 Hi, sorry for my late anwser. I check logs here: /var/log/syslog I can only see everythin after crash and reboot. Logs start at 11:59:27 which is after crash . Crash was ~2 min before that. Please let me where I exact need to serach for all logs. I could not find out. Thanks Quote Link to comment
itimpi Posted July 23, 2023 Share Posted July 23, 2023 5 minutes ago, derbe said: Hi, sorry for my late anwser. I check logs here: /var/log/syslog I can only see everythin after crash and reboot. Logs start at 11:59:27 which is after crash . Crash was ~2 min before that. Please let me where I exact need to serach for all logs. I could not find out. Thanks If you want logs that survive s crash/reboot then you need to enable the syslog server. Quote Link to comment
derbe Posted July 23, 2023 Author Share Posted July 23, 2023 (edited) Hi, Syslog Server is enabled, but in the folder where it should store there is no logs file(s). Edited July 23, 2023 by derbe Quote Link to comment
itimpi Posted July 23, 2023 Share Posted July 23, 2023 Just now, derbe said: Hi, Syslog Server is enabled, but in the folder where it should store there is no logs file(s). Have you set either the mirror to flash option, or set the Unraid server’s IP address into the remote server address. Quote Link to comment
derbe Posted July 23, 2023 Author Share Posted July 23, 2023 Mirror syslog to flash is set to yes. Remote syslog server is empty. Quote Link to comment
itimpi Posted July 23, 2023 Share Posted July 23, 2023 4 minutes ago, derbe said: Mirror syslog to flash is set to yes. Remote syslog server is empty. Then you should be getting a file created in the ‘logs’ folder on the flash drive. Quote Link to comment
derbe Posted July 23, 2023 Author Share Posted July 23, 2023 (edited) Does this need to be on the stick? Cause now it points to folder on a drive which is mounted. Looks like there is only mounted folder shown. But for sure there is no log on the selected folder. Edited July 23, 2023 by derbe Quote Link to comment
trurl Posted July 23, 2023 Share Posted July 23, 2023 If you mirror to flash drive, that is on the boot flash drive in the logs folder. If you set it to log to a different path, you also have to tell it which server you want to log it to. 18 minutes ago, itimpi said: set the Unraid server’s IP address into the remote server address. Quote Link to comment
derbe Posted July 24, 2023 Author Share Posted July 24, 2023 (edited) Hi, I removed the stick and found the logs (which I could not find) please see attached file. Please let me know whats wrong and can be done by my site, thanks. Edited July 24, 2023 by derbe Quote Link to comment
itimpi Posted July 24, 2023 Share Posted July 24, 2023 2 minutes ago, derbe said: please see attached file. There does not seem to be an attached file Quote Link to comment
derbe Posted July 24, 2023 Author Share Posted July 24, 2023 (edited) Sorry, I need to Edit the file first, so I remove it but now it should be there. Log_Server.txt €: I'm not expert, looks like my cach drive is kind of broken? But GUI show 0 errors. Smartreport looks ok? Samsung_SSD_960_PRO_1TB_S3EVNCAJ102515D-20230724-1748.txt Edited July 24, 2023 by derbe Quote Link to comment
itimpi Posted July 24, 2023 Share Posted July 24, 2023 It looks like quite a lot of your plugins are badly out of date, and some them I think may not be compatible with the 6.12.x series so you want to get them all up-to-date. You should also update to the 6.12.3 Unraid release as there have quite a few fixes made since the 6.12.0release that you appear to be running from your last diagnostics. I would suggest also installing the Fix Common Problems plugin as that helps with identifying obvious issues. Quote Link to comment
derbe Posted July 24, 2023 Author Share Posted July 24, 2023 Ok, I did update to the 6.12.3 and install Fix Common Problems plugin. Now I'm udating some docker which I run. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.