jcarre Posted July 3, 2023 Share Posted July 3, 2023 Hello everyone, This weekend the planned parity checked started and one of my disks became disabled with a bunch of errors after a few hours. I did a short smart test and the disk turned out to be fine. Thinking that it might have been an error with the HBA (it's really hot right now), I cranked the fans up and started the a rebuild process with the same disk. The rebuild turned out fine and everything appeared to be ok. So I started a check again, and the error showed once more within a few minutes. Is my disk dead? Is it just writing fine but unable to read? What shall I do? Thanks in advance. ivpiter-diagnostics-20230703-2101.zip ivpiter-syslog-20230703-1900.zip Quote Link to comment
JorgeB Posted July 4, 2023 Share Posted July 4, 2023 It's not logged as a disk problem and SMART looks fine, replace cables and try again. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.