KptnKMan Posted July 29, 2023 Share Posted July 29, 2023 (edited) Hi all, apparently its my luck that this happens a day before I go travelling. I have 2 new 16TB Western Digital "My Book" that I have connected to my unraid. I decided about a week ago to format them both with ZFS (To try out ZFS), so I did and filled them with data. Today, I shut down both servers and moved the disks to the second server, so I could back them up. Upon starting up, the first disk will not mount, but the second appears to mount fine, both were formatted the same way without errors. Checking the disk log I see this: text error warn system array login Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] 4096-byte physical blocks Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] Write Protect is off Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] Mode Sense: 47 00 10 08 Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] No Caching mode page found Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through Jul 29 23:13:14 soundwave kernel: sda: sda1 Jul 29 23:13:14 soundwave kernel: sd 1:0:0:0: [sda] Attached SCSI disk Jul 29 23:13:57 soundwave emhttpd: WD_My_Book_25ED_32504A353237474A-0:0 (sda) 512 31251759104 Jul 29 23:13:57 soundwave emhttpd: read SMART /dev/sda Jul 29 23:14:03 soundwave unassigned.devices: Disk with ID 'WD_My_Book_25ED_32504A353237474A-0:0 (sda)' is not set to auto mount. Jul 29 23:29:00 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync2'... Jul 29 23:29:03 soundwave unassigned.devices: Successfully mounted 'sda1' on '/mnt/disks/sys_sync2'. Jul 29 23:29:03 soundwave unassigned.devices: Device '/dev/sda1' is not set to be shared. Jul 29 23:30:01 soundwave unassigned.devices: Unmounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync2'... Jul 29 23:30:13 soundwave unassigned.devices: Successfully unmounted 'sda1' Jul 29 23:38:38 soundwave kernel: sd 1:0:0:0: [sda] Spinning up disk... Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] 4096-byte physical blocks Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] Write Protect is off Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] Mode Sense: 47 00 10 08 Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] No Caching mode page found Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through Jul 29 23:38:57 soundwave kernel: sda: sda1 Jul 29 23:38:57 soundwave kernel: sd 1:0:0:0: [sda] Attached SCSI disk Jul 29 23:38:58 soundwave unassigned.devices: Disk with ID 'WD_My_Book_25ED_3348475A58554C4E-0:0 (sda)' is not set to auto mount. Jul 29 23:39:01 soundwave emhttpd: read SMART /dev/sda Jul 29 23:40:04 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:40:06 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:40:30 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:40:33 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:40:43 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync'... Jul 29 23:40:45 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:41:32 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync'... Jul 29 23:41:35 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:42:49 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync'... Jul 29 23:42:52 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:43:08 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:43:11 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:43:22 soundwave ool www[19861]: /usr/local/emhttp/plugins/unassigned.devices/scripts/rc.unassigned 'detach' 'sda' 'true' Jul 29 23:43:24 soundwave unassigned.devices: Device 'sda' has been detached. Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] 4096-byte physical blocks Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] Write Protect is off Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] Mode Sense: 47 00 10 08 Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] No Caching mode page found Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through Jul 29 23:45:44 soundwave kernel: sda: sda1 Jul 29 23:45:44 soundwave kernel: sd 1:0:0:0: [sda] Attached SCSI disk Jul 29 23:45:45 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:45:48 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:45:57 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:45:59 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:46:04 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:46:07 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:51:02 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:51:04 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:51:34 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:51:37 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:52:02 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:52:05 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 29 23:57:53 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 29 23:57:56 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 30 00:00:49 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 30 00:00:52 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' Jul 30 00:01:20 soundwave unassigned.devices: Mounting partition 'sda1' at mountpoint '/mnt/disks/sys_sync1'... Jul 30 00:01:22 soundwave unassigned.devices: Mount of 'sda1' failed: 'Cannot determine Pool Name of '/dev/sda1'' ** Press ANY KEY to close this window ** In the UI, I can see the disk mount button but it just fails every time I try to mount it. I can't see any other obvious errors, I tried detatching and disconnecting both disks, then reconnecting and same scenario (disk 1 fails to mount). This is the fist time I'm using ZFS, and I'm not sure where to start. I can't find any other details in the Ui, there are no SMART errors showing, its a new disk a week old. Can anyone help? Edited July 29, 2023 by KptnKMan 1 Quote Link to comment
KptnKMan Posted July 29, 2023 Author Share Posted July 29, 2023 (edited) Some responses I've seen so far: # zpool import /dev/sda cannot import '/dev/sda': no such pool available # zpool import no pools available to import # zfs mount sys_sync2 /mnt/disks/sys_sync2 # zfs list NAME USED AVAIL REFER MOUNTPOINT sys_sync 14.4T 128M 14.4T /mnt/disks/sys_sync1 sys_sync2 12.5T 1.95T 12.5T /mnt/disks/sys_sync2 I also tried: # zfs mount sys_sync but this appears to hang and do nothing. Edited July 29, 2023 by KptnKMan Quote Link to comment
JorgeB Posted July 31, 2023 Share Posted July 31, 2023 If "zpool import" doesn't show anything the pool was likely damaged and it can no longer be imported. Quote Link to comment
miicar Posted November 15, 2023 Share Posted November 15, 2023 U V: 6:12.4 - all plugins up to date. I am also getting this error on a (x6) disk z2 pool in UD. I created the pool in the array with the gui. Then moved the disks to UD, as it's going to be an offsite backup, then deleted the pool from the unraid gui. Mounted the pool in UD and moved the backup images over. Everything transferred without issue. I unmounted it went about my day till i remembered i wanted to put one more folder in the backup pool before i move it to its new home across town...now it wont mount. Quote Nov 15 11:16:37 miiCARstorage unassigned.devices: Mounting partition 'sdae1' at mountpoint '/mnt/disks/elmonsitebu'... Nov 15 11:16:39 miiCARstorage unassigned.devices: Mount of 'sdae1' failed: 'Cannot determine Pool Name of '/dev/sdae1'' it doesn't matter which of the 6 disks i click mount on, it says the same info (just changed to match the disk i am clicking mount on) Quote Link to comment
JorgeB Posted November 15, 2023 Share Posted November 15, 2023 UD doesn't support zfs pools, you can import the pool manually with zpool import. Quote Link to comment
miicar Posted November 18, 2023 Share Posted November 18, 2023 On 11/15/2023 at 11:58 AM, JorgeB said: UD doesn't support zfs pools, you can import the pool manually with zpool import. weird, how i mount and run ZFS pools in UD all the time! i must have the special edition?? 🤪 anyway, after making a pool and putting those drives in there, again, then removing the drives, and deleting the pool, it did mount in UD again, and i transfered about 3tb from my array! Anyway...i think i am having USB issues, as random issues come and go lately. Quote Link to comment
JorgeB Posted November 19, 2023 Share Posted November 19, 2023 17 hours ago, miicar said: how i mount and run ZFS pools in UD all the time! i must have the special edition?? Single disk or multi disk pools? AFAIK only single disk pools are supported. Quote Link to comment
miicar Posted November 20, 2023 Share Posted November 20, 2023 7 hours ago, JorgeB said: Single disk or multi disk pools? AFAIK only single disk pools are supported. these ones are multi (x6 disks zR6) Quote Link to comment
JorgeB Posted November 20, 2023 Share Posted November 20, 2023 Good to know, was under the impression that multi disk zfs pools were not supported by UD. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.