UtahDeLorean Posted August 4, 2023 Share Posted August 4, 2023 Just want to know how much longer I should wait. I've been a little over 24 hours on a 10tb drive. I wished that I knew what caused the corruption to happen crossfiregaming-diagnostics-20230804-0939.zip Quote Link to comment
JorgeB Posted August 4, 2023 Share Posted August 4, 2023 There are what look like power/connection issues with this disk spamming the log: Model Family: Western Digital Ultrastar (He10/12) Device Model: WDC WD100EDAZ-11F3RA0 Try and fix that when possible, how are you running xfs_repair? If it's not from the GUI post the command used. Quote Link to comment
UtahDeLorean Posted August 4, 2023 Author Share Posted August 4, 2023 25 minutes ago, JorgeB said: There are what look like power/connection issues with this disk spamming the log: Model Family: Western Digital Ultrastar (He10/12) Device Model: WDC WD100EDAZ-11F3RA0 Try and fix that when possible, how are you running xfs_repair? If it's not from the GUI post the command used. Okay I am going to shut down the server and check all of the connections. I was using the GUI, but I can use the terminal. Thanks for your quick reply Quote Link to comment
trurl Posted August 4, 2023 Share Posted August 4, 2023 Just now, UtahDeLorean said: I was using the GUI, but I can use the terminal. Easy to get the command wrong, better to use the GUI Quote Link to comment
UtahDeLorean Posted August 4, 2023 Author Share Posted August 4, 2023 4 hours ago, JorgeB said: There are what look like power/connection issues with this disk spamming the log: Model Family: Western Digital Ultrastar (He10/12) Device Model: WDC WD100EDAZ-11F3RA0 Try and fix that when possible, how are you running xfs_repair? If it's not from the GUI post the command used. For future reference where did you find those details about the error with the drive? Quote Link to comment
UtahDeLorean Posted August 5, 2023 Author Share Posted August 5, 2023 I am going on another 24 hours. Is there a quicker way to fix this so that I can get my server up and running again? It just keeps saying this Phase 1 - find and verify superblock... couldn't verify primary superblock - not enough secondary superblocks with matching geometry !!! attempting to find secondary superblock... ..found candidate secondary superblock... unable to verify superblock, continuing... ..found candidate secondary superblock... unable to verify superblock, continuing... .found candidate secondary superblock... unable to verify superblock, continuing... ...found candidate secondary superblock... unable to verify superblock, continuing... Quote Link to comment
Solution JorgeB Posted August 6, 2023 Solution Share Posted August 6, 2023 If no valid backup superblock is found after a few minutes it usually means one won't be found, best bet is to restore from a backup if available or use something like UFS explorer to see if it can recover the data. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.