airport Posted September 2, 2023 Share Posted September 2, 2023 (edited) Dear all, I change my mainboard and after pulll out some hdds now push in new sata ports, I can add them to array but data not show and so would you please solve that problem for me. Best regards, unraid-diagnostics-20230902-1720.zip Edited September 2, 2023 by airport Quote Link to comment
JorgeB Posted September 2, 2023 Share Posted September 2, 2023 What controller were the disks using before? Quote Link to comment
airport Posted September 3, 2023 Author Share Posted September 3, 2023 Dear Sir, before adding that 3 hdd (4,5,6) can read data in new SATA mainboard , but when I add them to array it show that errrors. Quote Link to comment
JorgeB Posted September 3, 2023 Share Posted September 3, 2023 Not sure I follow, are those disks new or did they already have data? If the latter 13 hours ago, JorgeB said: What controller were the disks using before? Quote Link to comment
airport Posted September 3, 2023 Author Share Posted September 3, 2023 All disk have data and belong to one array before I pull it out of old mainboard Quote Link to comment
JorgeB Posted September 3, 2023 Share Posted September 3, 2023 what board/controller? Quote Link to comment
airport Posted September 4, 2023 Author Share Posted September 4, 2023 Old board: Supermicor with LSI controller (run as Sata extend) New board: Supermicro with sata on board Quote Link to comment
JorgeB Posted September 4, 2023 Share Posted September 4, 2023 Most likely the LSI controller was in RAID mode, if parity is valid unassign one of the unmountable disks, start the array and post new diags. Quote Link to comment
JonathanM Posted September 4, 2023 Share Posted September 4, 2023 7 hours ago, JorgeB said: Most likely the LSI controller was in RAID mode, if parity is valid unassign one of the unmountable disks, start the array and post new diags. Screenshot in first post shows no parity. Would building parity after the fact work? Quote Link to comment
JorgeB Posted September 4, 2023 Share Posted September 4, 2023 7 minutes ago, JonathanM said: Screenshot in first post shows no parity. Oops, missed that, that can only be done with valid parity. See if the disks mount with UD if yes, transfer the data and reformat, if not you'll need to reconnect them with the old board. Quote Link to comment
airport Posted September 6, 2023 Author Share Posted September 6, 2023 I put only one hdd but can not read the data in that hdd, it show unmountable Quote Link to comment
JorgeB Posted September 6, 2023 Share Posted September 6, 2023 15 minutes ago, airport said: I put only one hdd but can not read the data in that hdd, it show unmountable That won't help: On 9/4/2023 at 4:44 PM, JorgeB said: See if the disks mount with UD if yes, transfer the data and reformat, if not you'll need to reconnect them with the old board. Quote Link to comment
airport Posted September 6, 2023 Author Share Posted September 6, 2023 Dear Sir, I do not understand how to do "the disks mount with UD ". Regards, Quote Link to comment
JorgeB Posted September 6, 2023 Share Posted September 6, 2023 Install the UD plugin and see if those disks mount with it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.