Jambo Posted September 8, 2023 Share Posted September 8, 2023 (edited) homeserver-diagnostics-20230908-1132.zip Diagnostics attached. I set the "Autostart Array on Startup" to false so I could add a new drive and immediately the UI crashed and only responded with error 500. I restarted the system and on startup, the array did not start, and the UI is still responding error 500. I've tried the following commands to no avail: /etc/rc.d/rc.nginx reload /etc/rc.d/rc.php-fpm restart Any help? Logging in via the SAFE Mode with GUI, it also fails, with just a white screen showing in Firefox. Edited September 8, 2023 by Jambo Clarify that array now starts but UI inaccessible. Quote Link to comment
Jambo Posted September 8, 2023 Author Share Posted September 8, 2023 Looking through the syslog I can see: Sep 8 11:29:16 HomeServer crond[1925]: exit status 255 from user root /usr/local/emhttp/plugins/dynamix/scripts/monitor &> /dev/null ### [PREVIOUS LINE REPEATED 1 TIMES] ### Sep 8 11:30:32 HomeServer emhttpd: error: cmdStart: missing csrf_token Sep 8 11:31:16 HomeServer crond[1925]: exit status 255 from user root /usr/local/emhttp/plugins/dynamix/scripts/monitor &> /dev/null Not sure if they're relevant? Quote Link to comment
JorgeB Posted September 8, 2023 Share Posted September 8, 2023 Post new diags after booting in safe mode. Quote Link to comment
Jambo Posted September 8, 2023 Author Share Posted September 8, 2023 Thanks for the interest, new diags below. GUI Mode shows blank white screen on Unraid's own firefox. homeserver-diagnostics-20230908-2320.zip Quote Link to comment
JorgeB Posted September 9, 2023 Share Posted September 9, 2023 I don't see a reason for the GUI not working, try booting the server with a different stock flash drive, no key needed, just to see if it works and see if it's a config issue. Quote Link to comment
Jambo Posted September 9, 2023 Author Share Posted September 9, 2023 Yep, that works. I assume it's no help but diags below just in case. How do I get to the unraid connect flash backup without the server GUI? Or do I have to find the issue in the config? tower-diagnostics-20230909-0229.zip Quote Link to comment
Solution JorgeB Posted September 9, 2023 Solution Share Posted September 9, 2023 I would backup current flash drive, recreate it and then restore just the bare minimum, like super.dat and pools folder for the assignments, the key file, and the docker user templates folder, then boot to confirm it's still working, and if yes either reconfigure the rest of the server or restore a few files at a time from the backup (config folder only) until you find the culprit. Quote Link to comment
Jambo Posted September 9, 2023 Author Share Posted September 9, 2023 I'm genuinely shocked that the answer is to start from scratch and rebuild to solve this issue. Also, the Unraid connect backup is not accessible if you don't have a working server? What's the point of it? So the key files to start with are: /config/super.dat /config/Plus.key /config/pools/ /config/plugins/dockerMan I'll also change the disk.cfg to prevent auto-start and just check the UI before continuing. I'm guessing after that, copy shares and all of plugins over? Would you go as far as copying over all the config after that? Quote Link to comment
itimpi Posted September 9, 2023 Share Posted September 9, 2023 1 minute ago, Jambo said: Also, the Unraid connect backup is not accessible if you don't have a working server? What's the point of it? You can get to it from the forum - no need to have a working server. Quote Link to comment
Jambo Posted September 9, 2023 Author Share Posted September 9, 2023 So I've got it running and working again, Selectively and slowly putting the plugins back has narrowed it down to either: Dynamix SSD Trim intel-gpu-top No idea which but whatever. Can't test now as it's doing a 16tb disk clear 8 hours ago, itimpi said: You can get to it from the forum - no need to have a working server. Thanks mate - didn't see the option the first time I ventured in there! Quote Link to comment
SimonF Posted September 9, 2023 Share Posted September 9, 2023 21 minutes ago, Jambo said: So I've got it running and working again, Selectively and slowly putting the plugins back has narrowed it down to either: Dynamix SSD Trim intel-gpu-top No idea which but whatever. Can't test now as it's doing a 16tb disk clear Thanks mate - didn't see the option the first time I ventured in there! Trim is in os from 6.11 so wou!d be likely issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.