Daaadou Posted October 9, 2023 Share Posted October 9, 2023 Hello, Yet another Unraid is not booting topic. It started yesterday, I don't even know why since it was running for two months and I did nothing to stop it. Anyways. It was not able to start again. I brought the server in my room so I could see what was going on with a monitor, plugged a keyboard etc. At first, not possible to go through bzfirmware checksum, error and reboot. I reinstalled my flash drive (sandisk cruzer fit) with the Unraid soft and copied my config files. Once, it worked and got passed the bzfirmware and got stuck there, here is the screen : I tried again, now it stops at another bz files... Strongly indicates the thumb drive. Everytime I flash the drive, it seems to work once (not sure anymore with the many attemps I did) but not twice and get stucked at checksum afterwards. I ordered a new thumb drive but in the meantime, having some feedback would not hurt. Especially to decipher the INIT warning messages. What is going on? Thanks in advance community. Quote Link to comment
JorgeB Posted October 9, 2023 Share Posted October 9, 2023 Try a different flash drive with a stock install, no key needed, if it boots reliably transfer the license. Quote Link to comment
Daaadou Posted October 9, 2023 Author Share Posted October 9, 2023 Hello Jorge, Thank you for your answer. Will do, how about config files? BR, David Quote Link to comment
JorgeB Posted October 9, 2023 Share Posted October 9, 2023 If you need to transfer the key copy and restore the current /config folder. Quote Link to comment
Daaadou Posted October 9, 2023 Author Share Posted October 9, 2023 Hello, I received the new thumb drive, fresh install of 6.12.4, still stuck at bzfirmware... Quote Link to comment
itimpi Posted October 9, 2023 Share Posted October 9, 2023 Try rewriting all the bz* type files as described here in the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page. The Unraid OS->Manual section in particular covers most features of the current Unraid release. Quote Link to comment
Solution Daaadou Posted October 9, 2023 Author Solution Share Posted October 9, 2023 I did that with the bz files but it didn't work. Since I suspected it could be hardware, I used the RAM from my desktop and put it inside my Unraid NAS, no more bzfirmware issue, got stucked once or twice trying to boot but at different level. Then it reached the login page. I hope that was it. These were some 10 years old RAM sticks from my old desktop, RIP... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.