UNABLE TO LOAD WEBUI . LOCAL CMD LINE AND SSH STILL WORKING

[MatthewLuky]

normal or safe mode the same

WebUI - Not working

SMB - Not working

Docker - Working

connect.myunraid.net - running

Local Access CMDline - Working

Local Access GUI - Notworking

SSH (Over any IP assigned) - Working

 

try to restart rc.nginx not work, nginx is not running, No obvious problems found in diagnostics.

unraid-diagnostics-20231207-0036.zip

[JorgeB]

Try disabling ssl, type

use_ssl no

If that doesn't help, boot with a different flash drive using a stock Unraid install, no key needed, to confirm if it's a config problem.

[ljm42]

You are having issues with SSL and DNS.

 

After disabling SSL like JorgeB recommended you should be able to access the server via:

  http://10.10.10.10

(note: http not https)

 

Then follow the instructions here:

  https://docs.unraid.net/unraid-os/manual/security/secure-webgui-ssl/

to enable SSL with a custom certificate. Note that servername + localTLD has to be listed in the custom SSL cert. And the network has to provide a DNS entry that resolves to the server's IP.

[MatthewLXJ]

Thanks for the replies from the two people above. I successfully entered webui through your suggestions.

7 hours ago, ljm42 said:

You are having issues with SSL and DNS.

 

After disabling SSL like JorgeB recommended you should be able to access the server via:

  http://10.10.10.10

(note: http not https)

 

Then follow the instructions here:

  https://docs.unraid.net/unraid-os/manual/security/secure-webgui-ssl/

to enable SSL with a custom certificate. Note that servername + localTLD has to be listed in the custom SSL cert. And the network has to provide a DNS entry that resolves to the server's IP.

Thanks for the replies from the two people above. I successfully entered webui through your suggestions.