Unraid unreachable after a few days - New Server Build

[Drezin]

Hello,

 

I have a peculiar issue going on.  My new unraid server seems to go unreachable after a few days. Everything is running but the UI does not pull up nor do any docker services. The only way to get it working again is to do a hard reboot. I did search the forums and find another post similar to this problem and did some of the things that suggested but they have not seemed to help. The two items I have tried are:

 

1) going into the BIOS and turning off C-States. It is now disabled and the problem persists. 

2) I did try to look for a power management in the bios and set it to typical but I did not see anywhere to change that. 

 

Here is the type of setup I have:

 

Unraid OS V. 6.12.4

Intel Core I7 CPU

MACHINST Motherboard

16GB of RAM

4 Drives (2 SSD) and 1 HDD 6TB  and 1 Parity 6TB

 

Here is the Diagnostic and the Syslog server log:

krynn-diagnostics-20231219-1140.zip

syslog-192.168.1.56.log

 

Please if anyone can help that would be greatly appreciated.

 

Thank you very much,

 

Drezin

[trurl]

Change Docker from macvlan to ipvlan.

 

Check filesystem on disk1.

 

Rush named pools 👍

 

[Drezin]

Thanks @trurl

 

ok i stopped Docker and changed macvlan to IPvlan and ran a file system check.  Not sure what is going on here but perhaps you can lend some insight 

 

 

 

Thank you for the help.

 

Rush on !!!

 

Drezin

[itimpi]

You need to run without -n (the no modify flag) for anything to be repaired, and if it asks for it add -L.   After that restart  the array in normal mode.