SHADOW116 Posted December 22, 2023 Share Posted December 22, 2023 Hi, every time when i turn on my server its doing a parity check. Also have a diagnostics log that saved with every shutdown. Think something is not closing properly but cannot figure it out. download-box-diagnostics-20231220-0306.zip Quote Link to comment
Gragorg Posted December 22, 2023 Share Posted December 22, 2023 Usually unclean shutdowns cause a parity check on startup. You should enable syslog server to capture whats happening during a shutdown. The regular syslog clears with every reboot. Quote Link to comment
JorgeB Posted December 22, 2023 Share Posted December 22, 2023 Docker is failing to unmount, not clear why though. Quote Link to comment
SHADOW116 Posted December 24, 2023 Author Share Posted December 24, 2023 I turned on the syslog server, then canceled the Parity-Check. After that, I turned off the server and turned it back on, and everything was fine. Today, I turned it on again after a long period of being off, and still no issues. Thnx for helping Quote Link to comment
SHADOW116 Posted January 27 Author Share Posted January 27 I Stil have problem i have file of the Syslog syslog-previous Quote Link to comment
itimpi Posted January 27 Share Posted January 27 Jan 26 02:36:05 download-box upsmon[5310]: UPS [[email protected]] was last known to be calibrating and currently is not communicating, assuming dead Jan 26 02:36:05 download-box upsd[5306]: Client [email protected] set FSD on UPS [ups] Jan 26 02:36:05 download-box upsmon[5310]: Executing automatic power-fail shutdown Jan 26 02:36:05 download-box upsmon[5310]: Auto logout and shutdown proceeding Jan 26 02:36:05 download-box blazer_usb[5302]: Communications with UPS re-established Jan 26 02:36:05 download-box upsd[5306]: UPS [ups] data is no longer stale Jan 26 02:36:10 download-box shutdown[21396]: shutting down for system halt That shows that a shutdown was initiated by the UPS becoming unavailable Quote Link to comment
JorgeB Posted January 27 Share Posted January 27 I don't see any issue in this log, docker unmounted and the array stopped: Jan 26 02:37:22 download-box kernel: mdcmd (37): stop Jan 26 02:37:22 download-box kernel: md1p1: stopping Jan 26 02:37:22 download-box kernel: md2p1: stopping Jan 26 02:37:22 download-box kernel: md3p1: stopping Jan 26 02:37:22 download-box kernel: md4p1: stopping Jan 26 02:37:22 download-box kernel: md: unRAID driver removed Jan 26 02:37:22 download-box emhttpd: shcmd (56723): /sbin/modprobe md-mod super=/boot/config/super.dat Jan 26 02:37:22 download-box kernel: md: unRAID driver 2.9.27 installed Quote Link to comment
SHADOW116 Posted January 29 Author Share Posted January 29 Thnx for cheaking i change UPS setup it see that was problem thnx for the help Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.