Gizmotoy Posted January 15 Share Posted January 15 (edited) I've been using Unraid for a very long time, but have never run a cache drive. As I was deprecating some old hard drives, I decided I wanted to give this a shot. I'm getting an error in the UI that says "Unmountable: Unsupported or no file system". I do see the section at the bottom of the main page that says "Unmountable disks present" and there is the "Yes I want to do this" box alongside the format button, which I tried, but even after that happens the drives still show the same error. It's not clear what I'm doing wrong. Does anything stick out? The process I followed: Got former array drives out of the array and got the array back in good shape Precleared former array drives (primarily as an integrity check) Stopped the array Increased the cache slot size to 2 to enable direct mirroring Added precleared drives to cache slots 1 and 2 Started the array At the bottom of the main page, clicked the "yes I want to do this" and the "Format button Verified the errors and state still exist I think I then repeated steps 3-8 a second time, with the same result. Running 6.12.6. hyperion-diagnostics-20240115-0949.zip Edited January 15 by Gizmotoy Quote Link to comment
Solution JorgeB Posted January 15 Solution Share Posted January 15 Jan 15 09:39:21 Hyperion root: Warning: The kernel is still using the old partition table. Jan 15 09:39:21 Hyperion root: The new table will be used at the next reboot or after you Reboot and try again. Quote Link to comment
Gizmotoy Posted January 15 Author Share Posted January 15 Ah, tricky. I did not see that in the log. I was hunting using the words "format" and "cache". This was exactly it, though, after a reboot everything is working correctly. Thank you! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.