suchamoneypit Posted March 22 Share Posted March 22 Recently on my last few parity checks I've been getting thousands of parity errors when before I consistently got zero, or 1 or 2. Doing some light research I keep seeing people asking for diagnostics files, specifically after running a parity check without error correction. I've done so, but having trouble seeing someone also explain where to look for the info on what's at error. Could someone help me figure out what is causing parity errors, and really I would like to know if you could point me to where specifically I should be looking to where the errors are occurring? My uneducated guess would be a hardware issue. There are no reported errors on any of my drives though. Attached is diagnostics I ran recently with error correction off. Below is also a history of my parity checks. 3/5 and 3/11 were error correcting, and once I saw it repeat with similar error count I ran 3-18 without error correcting. s-cartographer-diagnostics-20240320-1752.zip Quote Link to comment
Solution JorgeB Posted March 22 Solution Share Posted March 22 The two logged parity checks have the same errors, at least the logged ones, reboot to clear the log, then run a correcting parity check, then a non correcting one, all without rebooting, if the second one finds new errors post new diags. Quote Link to comment
suchamoneypit Posted March 22 Author Share Posted March 22 1 hour ago, JorgeB said: The two logged parity checks have the same errors, at least the logged ones, reboot to clear the log, then run a correcting parity check, then a non correcting one, all without rebooting, if the second one finds new errors post new diags. ok, thank you. I will start those now. They take a while to complete so it might be a day or two before I can come back with the new diag. Quote Link to comment
JorgeB Posted March 22 Share Posted March 22 23 minutes ago, suchamoneypit said: so it might be a day or two before I can come back with the new diag. No rush, we will still be here 😁 1 Quote Link to comment
itimpi Posted March 22 Share Posted March 22 You might want to consider installing the Parity Check Tuning plugin. Even if you do not make use of its other features the Parity History entries will start being enhanced to give more information about the check such as whether it was correcting or not. 1 Quote Link to comment
suchamoneypit Posted March 24 Author Share Posted March 24 (edited) On 3/22/2024 at 2:10 PM, JorgeB said: No rush, we will still be here 😁 So interestingly enough, after the 2nd non correcting parity check, no errors. Which is weird because I was consistently getting them from the checks before. Attached the new diag, though. Also I see the history tells you whether it was error correcting or not. I thought I unchecked one previously but apparently I didn't, because this shows the only non error correcting one being the one I just did. So I guess for now I wait and see if the errors resurface. s-cartographer-diagnostics-20240324-1849.zip Edited March 24 by suchamoneypit Quote Link to comment
itimpi Posted March 25 Share Posted March 25 8 hours ago, suchamoneypit said: Also I see the history tells you whether it was error correcting or not. That will be because you had the Parity Check Tuning plugin installed at the time the most recent check was run. The earlier checks which do not show the type of check would have been run before installing the plugin so there is no indication of what type of check they were. 1 Quote Link to comment
JorgeB Posted March 25 Share Posted March 25 Second check not finding errors suggests everything is OK now, but keep monitoring tor the next checks, you can also reboot and run another one, since some sync errors issues only show the problem after a reboot. Quote Link to comment
suchamoneypit Posted March 28 Author Share Posted March 28 I did an additional parity check and its also zero errors again. Not sure exactly why I suddenly saw repeated large parity errors and it then went away. I will say that I never rebooted the server in between those so the only thing that's changed is that I fully shut down and restarted the server and then the parity errors stopped showing up. Anyways, it seems to be in a good spot now. Thanks for the advice. And yes Itimpi, I am running that plugin now. Thanks for making me aware of that! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.