hsingh314 Posted May 1 Share Posted May 1 Parity-check ran as scheduled and started populating millions of errors. What does this mean? Did I just lose all my data? I am kinda nervous about this. Thanks! bishop-diagnostics-20240501-1646.zip Quote Link to comment
itimpi Posted May 1 Share Posted May 1 Since according to the screenshot you got errors on multiple drives then it seems that something common to those drives is probably the problem (e.g. PSU, HBA). How many drives do you have - there seem to be more in the screenshot than I could see in the diagnostics. the diagnostics you posted seem to have been taken immediately after a reboot and therefore show no sign of the problem since logs are reset after a reboot. Quote Link to comment
hsingh314 Posted May 2 Author Share Posted May 2 I have 12 drives. I took the diag right after I stopped the parity check cause I freaked out cause it was doing the "write corrections to parity" thing. The system hasn't been rebooted for 24 days. Quote Link to comment
hsingh314 Posted May 2 Author Share Posted May 2 Any suggestions of what to do? Did I just lose all my data? Quote Link to comment
hsingh314 Posted May 2 Author Share Posted May 2 (edited) I just started getting messages this morning from my discord bot that files were missing - hundreds of them. When I woke up I tried to login and my root password wasn't working. Trying to restart the server right now hoping I'll be able to just even login. It had this error: Warning: fread(): Length parameter must be greater than 0 in /usr/local/emhttp/plugins/dynamix/include/.login.php on line 23 Edited May 2 by hsingh314 Quote Link to comment
JorgeB Posted May 2 Share Posted May 2 Looks like a controller problem, reboot and post new diags after array start Quote Link to comment
hsingh314 Posted May 2 Author Share Posted May 2 So started it up. Was missing all the drives but the ones connected to the MB directly. Saw JorgeB's message and decided to reseat the HBA - and it now seems like things are back to 'normal' but I still have the millions of errors. What should I do about this? Do I do a parity-error check but don't do the write corrections? I have also attached a diag from before starting the array and afterwards below. bishop-diagnostics-20240502-0909.zip bishop-diagnostics-20240502-0913.zip Quote Link to comment
JorgeB Posted May 2 Share Posted May 2 Where are you seeing errors? Syslog is clean so far. Quote Link to comment
hsingh314 Posted May 2 Author Share Posted May 2 I am seeing the errors on my main screen and under the 'main' tab. Quote Link to comment
JorgeB Posted May 2 Share Posted May 2 That's from the last check, run a new one now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.